447FW326XM08

Micro-Banding Backshell with Self-Locking Rotatable Coupling and Shrink Boot Porch CONNECTOR DESIGNATOR: Product Series 447 - EMI/RFI Non-Environmental Banding Backshells Angle and Profile S - Straight W - 90° Elbow T - 45° Elbow Finish Symbol (See Table III) Basic Part Number Cable Entry (See Table IV) Shrink Boot Option Shrink boot and o-ring supplied with T option (Omit for none) 447-326 Composite Standard Profile EMI/RFI Composite Backshells A A F L H G U MIL-DTL-5015, -26482 Series II, and -83723 Series I and III MIL-DTL-38999 Series I, II MIL-DTL-38999 Series 1.5 (JN1003) MIL-DTL-38999 Series III and IV MIL-DTL-28840 DG123 and DG123A Drain Hole Option (Omit "D" if not required) B 447 H S 326 XM 19 12 D K T S SELF-LOCKING ROTATABLE COUPLING STANDARD PROFILE Connector Designator A, F, L, H, G and U Connector Shell Size (See Table II) Band Option B = 600-052 K = 600-052-1 Bands are Precoiled (Omit for none) Slot Option S - Pigtail Termin. Slot (Omit for none) C Anti-Decoupling Device 1.130 (28.7) Max. .31 (7.9) Typ. F Pigtail Termination Slot Entry Diameter E D Drain Holes Optional Accommodates 600-057 Micro Band Raised Configuration Shrink Sleeve (Mfr's Option) or Boot Groove, Typ. G E TABLE II: CONNECTOR SHELL SIZE Shell Size For Connector Designator* A F/L H G U ± .06 .69 08 08 09 – – .75 10 10 11 – 08 .81 12 12 13 11 10 .88 14 14 15 13 12 .94 16 16 17 15 14 .97 18 18 19 17 16 20 20 21 19 18 1.06 22 22 23 – 20 1.13 24 24 25 23 22 1.19 28 – – 25 24 1.34 E F G Max Entry Dash No.** 04 06 08 10 12 13 15 17 19 22 TABLE III: FINISH Symbol XM Finish Description 2000 Hour Corrosion Resistant Electroless Nickel 2000 Hour Corrosion Resistant Ni-PTFE, NickelFluorocarbon Polymer. 1000 Hour GreyTM 2000 Hour Corrosion Resistant Cadmium/ Olive Drab over Electroless Nickel F (1.5) (17.5) (19.1) (20.6) (22.4) (23.9) (24.6) (26.9) (28.7) (30.2) (34.0) ± .09 .88 1.00 1.13 1.31 1.38 1.44 1.63 1.75 1.88 2.13 (2.3) (22.4) (25.4) (28.7) (33.3) (35.1) (36.6) (41.4) (44.5) (47.8) (54.1) ± .09 1.06 1.13 1.19 1.25 1.31 1.34 1.44 1.50 1.56 1.66 (2.3) (26.9) (28.7) (30.2) (31.8) (33.3) (34.0) (36.6) (38.1) (39.6) (42.2) XMT XW G **Consult factory for additional entry sizes available. See introduction for additional connector front-end details. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-74 Micro-Banding Backshell with Self-Locking Rotatable Coupling and Shrink Boot Porch Anti-Decoupling Device E F Drain Holes Optional Raised Configuration (Mfr's Option) Accommodates 600-057 MicroBand Entry Diameter TABLE II: CONNECTOR SHELL SIZE (CONT.) Shell Size For Max Entry Connector Designator* Dash No. E F (Table 2) ± .06 (1.5) ± .09 (2.3) A F/L H G U 04 .72 (18.3) .87 (22.1) 08 08 09 – – 06 .75 (19.1) .93 (23.6) 10 10 11 – 08 08 .75 (19.1) 1.00 (25.4) 12 12 13 11 10 10 .76 (19.3) 1.03 (26.2) 14 14 15 13 12 12 .78 (19.8) 1.05 (26.7) 16 16 17 15 14 13 .79 (20.1) 1.06 (26.9) 18 18 19 17 16 15 .82 (20.8) 1.09 (27.7) 20 20 21 19 18 17 .86 (21.8) 1.13 (28.7) 22 22 23 – 20 19 .89 (22.6) 1.16 (29.5) 24 24 25 23 22 22 1.19 (30.2) .92 (23.4) 28 – – 25 24 TABLE IV: CABLE ENTRY Entry Dia. Entry Dia. Dash No. ±.03 (0.8) ±.03 (0.8) .75 (19.1) 12 .13 (3.3) .81 (20.6) 13 .19 (4.8) .88 (22.4) 14 .25 (6.4) .94 (23.9) 15 .31 (7.9) 1.00 (25.4) 16 .38 (9.7) 1.06 (26.9) 17 .44 (11.2) 1.13 (28.7) 18 .50 (12.7) 1.19 (30.2) 19 .56 (14.2) 1.25 (31.8) 20 .63 (16.0) 1.38 (35.1) 22 .69 (17.5) CAGE Code 06324 Entry Code 02 03 04 05 06 07 08 09 10 11 NOTES 1. 2. 3. 4. 770-001S**-0 shrink boot supplied with T option. See shrink boot product page for more details. Metric dimensions (mm) are in parenthesis and are for reference only. Coupling nut supplied unplated. See Table I in Intro for front-end dimensional details. © 2009 Glenair, Inc. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-75 Composite Backshells 447-326 Composite Standard Profile EMI/RFI A B C D E F G