447FW327XM08

Banding Backshell with Qwik-Ty® Strain Relief and Self-Locking Rotatable Coupling 447-327 Composite Standard Profile EMI/RFI Composite Backshells CONNECTOR DESIGNATOR: A A F L H G U MIL-DTL-5015, -26482 Series II, and -83723 Series I and III MIL-DTL-38999 Series I, II MIL-DTL-38999 Series 1.5 (JN1003) MIL-DTL-38999 Series III and IV MIL-DTL-28840 DG123 and DG123A Product Series 447 - EMI/RFI Non-Environmental Banding Backshells Drain Hole Option (Omit "D" if not required) Finish Symbol (See Table III) Slot Option S - Pigtail Termin. Slot (Omit for none) Angle and Profile S - Straight W - 90° Elbow Basic Part Number Cable Entry (See Table IV) Polysulfide Strips Termination area free of cadmium, XW finish only (Omit for none) B 447 H S 327 XW 19 13 D K P T S SELF-LOCKING ROTATABLE COUPLING STANDARD PROFILE Connector Designator A, F, L, H, G and U Connector Shell Size (See Table II) C Anti-Decoupling Device F E Anti-Decoupling Device Band Option 600-052-1 standard coiled band supplied with K option (Omit for none) Shrink Boot Option Shrink boot and o-ring supplied with T option (Omit for none) 1.28 (32.5) X Dia .67 (17.0) Typ. D Entry Diameter, Typ. Raised Configuration (Mfr's Option) Use MS33671 Tie-Strap or Equivalent G Drain Holes (Optional) Pigtail Termination Slot E Shrink Sleeve or Boot Groove, Typ. F Qwik-Ty® Strain Relief G © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-76 Banding Backshell with Qwik-Ty® Strain Relief and Self-Locking Rotatable Coupling Shell Size For Connector Designator* A F/L H G U ± .06 08 08 09 – – .69 10 10 11 – 08 .75 12 12 13 11 10 .81 14 14 15 13 12 .88 16 16 17 15 14 .94 18 18 19 17 16 .97 20 20 21 19 18 1.06 22 22 23 – 20 1.13 24 24 25 23 22 1.19 TABLE II: CONNECTOR SHELL SIZE E F G Max Entry Dash No** 04 05 07 09 11 13 15 17 20 (1.5) (17.5) (19.1) (20.6) (22.4) (23.9) (24.6) (26.9) (28.7) (30.2) ± .09 .88 1.00 1.13 1.31 1.38 1.44 1.63 1.75 1.88 (2.3) (22.4) (25.4) (28.7) (33.3) (35.1) (36.6) (41.4) (44.5) (47.8) ± .09 1.36 1.42 1.48 1.55 1.61 1.64 1.73 1.80 1.86 (2.3) (34.5) (36.1) (37.6) (39.4) (40.9) (41.7) (43.9) (45.7) (47.2) **Consult factory for additional entry sizes available. TABLE III: FINISH Symbol XM Finish Description 2000 Hour Corrosion Resistant Electroless Nickel 2000 Hour Corrosion Resistant Ni-PTFE, Nickel-Fluorocarbon Polymer. 1000 Hour GreyTM 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel XMT XW Entry Code 04 05 07 09 11 13 15 16 17 20 TABLE IV: CABLE ENTRY Entry Dia. ±.03 (0.8) .250 (6.4) .310 (7.9) .440 (11.2) .560 (14.2) .680 (17.3) .810 (20.6) .940 (23.9) 1.000 (25.4) 1.160 (29.5) 1.250 (31.8) X Dia. ±.03 (0.8) .510 (13.0) .510 (13.0) .510 (13.0) .630 (16.0) .630 (16.0) .630 (16.0) .630 (16.0) .630 (16.0) .630 (16.0) .630 (16.0) NOTES 1. 2. 3. 4. 5. 770-001S**-0 shrink boot supplied with T option. See shrink boot product page for more details. Consult factory for O-ring to be supplied with part less shrink boot. Metric dimensions (mm) are in parenthesis and are for reference only. Coupling nut supplied unplated. See Table I in Intro for front-end dimensional details. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-77 Composite Backshells 447-327 Composite Standard Profile EMI/RFI A B C D E F G