447LS328XM12

Band-in-a-Can Backshell with Strain-Relief Clamp and Self-Locking Rotatable Coupling CONNECTOR DESIGNATOR: 447-328 Composite Standard Profile EMI/RFI Composite Backshells A A F L H G U MIL-DTL-5015, -26482 Series II, and -83723 Series I and III MIL-DTL-38999 Series I, II MIL-DTL-38999 Series 1.5 (JN1003) MIL-DTL-38999 Series III and IV MIL-DTL-28840 DG123 and DG123A Angle and Profile S - Straight W - 90° Elbow Product Series 447 - EMI/RFI Non-Environmental Banding Backshells Finish Symbol (See Table III) Slot Option S - Pigtail Termin. Slot (Omit for none) Basic Part Number Cable Entry (See Table IV) 447 H S 328 XM 19 20 K S B SELF-LOCKING ROTATABLE COUPLING STANDARD PROFILE Connector Designator A, F, L, H, G and U Connector Shell Size (See Table II) Band Option Band supplied with K option (Omit for none) C AntiDecoupling Device 1.60 (40.6) Max. .44 (11.2) Typ. Accommodates 600-052-1 Band .71 (18.0) Ref F E Clamp Closed D Pigtail Termination Slot H G E Entry Dia. .71 (18.0) Ref Entry Diameter Clamp Closed H F 1. 2. 3. NOTES Metric dimensions (mm) are in parenthesis and are for reference only. Coupling nut supplied unplated. See Table I in Intro for front-end dimensional details. G © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-78 Band-in-a-Can Backshell with Strain-Relief Clamp and Self-Locking Rotatable Coupling TABLE II: CONNECTOR SHELL SIZE Shell Size For Connector Designator* E F A F/L H G U ± .06 (1.5) ± .09 (2.3) ± .09 .69 (17.5) .88 (22.4) 1.19 08 08 09 – – .75 (19.1) 1.00 (25.4) 1.25 10 10 11 – 08 .81 (20.6) 1.13 (28.7) 1.31 12 12 13 11 10 .88 (22.4) 1.31 (33.3) 1.38 14 14 15 13 12 .94 (23.9) 1.38 (35.1) 1.44 16 16 17 15 14 .97 (24.6) 1.44 (36.6) 1.47 18 18 19 17 16 20 20 21 19 18 1.06 (26.9) 1.63 (41.4) 1.56 22 22 23 – 20 1.13 (28.7) 1.75 (44.5) 1.63 24 24 25 23 22 1.19 (30.2) 1.88 (47.8) 1.69 28 – – 25 24 1.34 (34.0) 2.13 (54.1) 1.78 G Max Entry (2.3) Dash No.** (30.2) 10 (31.8) 12 (33.3) 14 (35.1) 16 (36.6) 20 (37.3) 20 (39.6) 22 (41.4) 24 (42.9) 32 (45.2) 32 **Consult factory for additional entry sizes available. TABLE III: FINISH Symbol XM Finish Description 2000 Hour Corrosion Resistant Electroless Nickel 2000 Hour Corrosion Resistant Ni-PTFE, Nickel-Fluorocarbon Polymer. 1000 Hour GreyTM 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel XMT XW TABLE IV: CABLE ENTRY H Entry Dia.* Clamp Closed Entry ±.03 (0.8) ±.06 (1.5) ±.03 (0.8) Code .26 (6.6) .94 (23.9) .22 (5.6) 10 .34 (8.6) 1.17 (29.7) .28 (7.1) 12 .46 (11.7) 1.28 (32.5) .34 (8.6) 14 .55 (14.0) 1.41 (35.8) .46 (11.7) 16 .62 (15.7) 1.50 (38.1) .55 (14.0) 18 .70 (17.8) 1.56 (39.6) .62 (15.7) 20 .78 (19.8) 1.69 (42.9) .70 (17.8) 22 .85 (21.6) 1.81 (46.0) .78 (19.8) 24 .95 (24.1) 1.91 (48.5) .85 (21.6) 28 1.02 (25.9) 2.02 (51.3) .95 (24.1) 32 * Entry diameter equals maximum wire bundle diameter. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-79 Composite Backshells 447-328 Composite Standard Profile EMI/RFI A B C D E F G