447LS331XM18

Composite Backshells CONNECTOR DESIGNATOR: 447-331 Composite EMI/RFI Dual-Banding Backshell with Self-Locking Rotatable Coupling A A F L H G U MIL-DTL-5015, -26482 Series II, and -83723 Series I and III MIL-DTL-38999 Series I, II MIL-DTL-38999 Series 1.5 (JN1003) MIL-DTL-38999 Series III and IV MIL-DTL-28840 DG123 and DG123A Product Series 447 - EMI/RFI Non-Environmental Banding Backshells Angle and Profile S - Straight W - 90° Elbow Finish Symbol (See Table III) Drain Hole Option (Omit "D" if not required) Slot Option S - Pigtail Termin. Slot (Omit for none) Basic Part Number Cable Entry (See Table IV) B 447 H S 331 XM 19 12 D K S SELF-LOCKING ROTATABLE COUPLING STANDARD PROFILE Connector Designator A, F, L, H, G and U Connector Shell Size (See Table II) Band Option 2 bands supplied with K option (Omit for none) C Anti-Decoupling Device 1.75 (44.5) O-Ring (Not supplied with Drain Hole Option) .94 (23.9) F E .44 (11.2) D Entry Diameter E Drain Holes (Optional) .38 (9.7) Pigtail Termination Slot G Accommodates 600-052-1 Band F 1. 2. 3. NOTES Metric dimensions (mm) are in parenthesis and are for reference only. Coupling nut supplied unplated. See Table I in Intro for front-end dimensional details. G © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-84 447-331 Composite EMI/RFI Dual-Banding Backshell with Self-Locking Rotatable Coupling Shell Size For Connector Designator* A F/L H G U 08 08 09 – – 10 10 11 – 08 12 12 13 11 10 14 14 15 13 12 16 16 17 15 14 18 18 19 17 16 20 20 21 19 18 22 22 23 – 20 24 24 25 23 22 28 – – 25 24 TABLE II: CONNECTOR SHELL SIZE ± .06 .69 .75 .81 .88 .94 .97 1.06 1.13 1.19 1.34 E (1.5) (17.5) (19.1) (20.6) (22.4) (23.9) (24.6) (26.9) (28.7) (30.2) (34.0) ± .09 .88 1.00 1.13 1.31 1.38 1.44 1.63 1.75 1.88 2.13 F (2.3) (22.4) (25.4) (28.7) (33.3) (35.1) (36.6) (41.4) (44.5) (47.8) (54.1) ± .09 1.69 1.75 1.81 1.88 1.94 1.97 2.06 2.13 2.19 2.28 G Max Entry (2.3) Dash No.** 04 (42.9) 06 (44.5) 08 (46.0) 10 (47.8) 12 (49.3) 13 (50.0) 15 (52.3) 17 (54.1) 19 (55.6) 22 (57.9) **Consult factory for additional entry sizes available. TABLE III: FINISH Symbol XM XMT XW Finish Description 2000 Hour Corrosion Resistant Electroless Nickel 2000 Hour Corrosion Resistant Ni-PTFE, NickelFluorocarbon Polymer. 1000 Hour GreyTM 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel Entry Code 03 04 05 06 07 08 09 10 11 12 TABLE IV: CABLE ENTRY Entry Dia. Entry Dia. Dash No. ±.03 (0.8) ±.03 (0.8) .81 (20.6) 13 .19 (4.8) .88 (22.4) 14 .25 (6.4) .94 (23.9) 15 .31 (7.9) 1.00 (25.4) 16 .38 (9.7) 1.06 (26.9) 17 .44 (11.2) 1.13 (28.7) 18 .50 (12.7) 1.19 (30.2) 19 .56 (14.2) 1.25 (31.8) 20 .63 (16.0) 1.38 (35.1) 22 .69 (17.5) .75 (19.1) © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-85 Composite Backshells A B C D E F G