447SF426NF16

447-426 EMI/RFI Non-Environmental Band-in-a-Can Backshell with Cable Clamp Strain-Relief Direct Coupling - Split Shell 447 F D 426 NF 16 12 K P 447 A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 2 CONNECTOR DESIGNATORS * Product Series Connector Designator Angle and Profile D = Split 90 F = Split 45 Basic Part No. Polysulfide (Omit for none) B = Band K = Precoiled Band (Omit for none) Cable Range (Table V) Shell Size (Table I) Finish (Table II) DIRECT COUPLING A Thread (Table I) J (Table III) E (Table IV) J G (Table III) (Table IV) B Typ. (Table I) F (Table IV) Split 45° Split 90° .500 (12.7) Max H (Table IV) Termination Area Free of Cadmium Knurl or Ridges Mfr's Option K* Cable Range L* * (Table V) Polysulfide Stripes P Option Band Option (K Option Shown See Note 3) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 447 - Page 14 with Cable Clamp Strain-Relief Direct Coupling - Split Shell See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) Elbow Size 10/12 14 16/18 20 22 24 28 32 TABLE IV: ELBOW DIMENSIONS E F G Max Max Max .500 (12.7) 1.870 (47.5) .750 (19.1) .560 (14.2) 1.940 (49.3) .810 (20.6) .680 (17.3) 2.070 (52.6) .930 (23.6) .750 (19.1) 2.130 (54.1) 1.000 (25.4) .820 (20.8) 2.190 (55.6) 1.060 (26.9) .880 (22.4) 2.250 (57.2) 1.120 (28.4) .940 (23.9) 3.100 (78.7) 1.180 (30.0) .990 (25.1) 2.400 (61.0) 1.340 (34.0) H Max 1.810 (46.0) 1.880 (47.8) 2.010 (51.1) 2.070 (52.6) 2.130 (54.1) 2.190 (55.6) 2.250 (57.2) 2.410 (61.2) Dash No. 10 12 14 16 18 20 22 24 28 32 K ±.030 .220 .310 .440 .560 .630 .750 .880 1.000 1.060 1.190 TABLE V: CABLE RANGE Cable Range L Max Min ±(.8) Max .130 (3.3) .250 (6.4) (5.6) 1.000 (25.4) .250 (6.4) .380 (9.7) (7.9) 1.250 (31.8) .310 (7.9) .440 (11.2) (11.2) 1.340 (34.0) .375 (9.5) .630 (16.0) (14.2) 1.470 (37.3) .560 (14.2) .690 (17.5) (16.0) 1.560 (39.6) .630 (16.0) .750 (19.1) (19.1) 1.620 (41.1) .750 (19.1) .880 (22.4) (22.4) 1.750 (44.5) .880 (22.4) 1.000 (25.4) (25.4) 1.870 (47.5) (26.9) 1.970 (50.0) 1.000 (25.4) 1.130 (28.7) (30.2) 2.090 (53.1) 1.130 (28.7) 1.250 (31.8) 1. Metric dimensions (mm) are indicated in parentheses. 2. When using Connector Designator B refer to pages 18 and 19 for part number development. 3. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 447 - Page 15 447 447-426 EMI/RFI Non-Environmental Band-in-a-Can Backshell