Banding Backshell with Qwik-Ty® Strain Relief and Self-Locking Rotatable Coupling
447-327 Composite Standard Profile EMI/RFI
Composite Backshells
CONNECTOR DESIGNATOR:
A
A F L H G U
MIL-DTL-5015, -26482 Series II, and -83723 Series I and III MIL-DTL-38999 Series I, II MIL-DTL-38999 Series 1.5 (JN1003) MIL-DTL-38999 Series III and IV MIL-DTL-28840 DG123 and DG123A
Product Series 447 - EMI/RFI Non-Environmental Banding Backshells
Drain Hole Option (Omit "D" if not required) Finish Symbol (See Table III)
Slot Option S - Pigtail Termin. Slot (Omit for none)
Angle and Profile S - Straight W - 90° Elbow
Basic Part Number
Cable Entry (See Table IV)
Polysulfide Strips Termination area free of cadmium, XW finish only (Omit for none)
B
447
H
S
327
XW
19
13
D
K
P
T
S
SELF-LOCKING
ROTATABLE COUPLING STANDARD PROFILE
Connector Designator A, F, L, H, G and U
Connector Shell Size (See Table II)
C
Anti-Decoupling Device F E Anti-Decoupling Device
Band Option 600-052-1 standard coiled band supplied with K option (Omit for none)
Shrink Boot Option Shrink boot and o-ring supplied with T option (Omit for none)
1.28 (32.5) X Dia
.67 (17.0) Typ.
D
Entry Diameter, Typ. Raised Configuration (Mfr's Option) Use MS33671 Tie-Strap or Equivalent G Drain Holes (Optional)
Pigtail Termination Slot
E
Shrink Sleeve or Boot Groove, Typ.
F
Qwik-Ty® Strain Relief
G
© 2009 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-76
Banding Backshell with Qwik-Ty® Strain Relief and Self-Locking Rotatable Coupling
Shell Size For Connector Designator* A F/L H G U ± .06 08 08 09 – – .69 10 10 11 – 08 .75 12 12 13 11 10 .81 14 14 15 13 12 .88 16 16 17 15 14 .94 18 18 19 17 16 .97 20 20 21 19 18 1.06 22 22 23 – 20 1.13 24 24 25 23 22 1.19
TABLE II: CONNECTOR SHELL SIZE E F G Max Entry Dash No** 04 05 07 09 11 13 15 17 20
(1.5) (17.5) (19.1) (20.6) (22.4) (23.9) (24.6) (26.9) (28.7) (30.2)
± .09 .88 1.00 1.13 1.31 1.38 1.44 1.63 1.75 1.88
(2.3) (22.4) (25.4) (28.7) (33.3) (35.1) (36.6) (41.4) (44.5) (47.8)
± .09 1.36 1.42 1.48 1.55 1.61 1.64 1.73 1.80 1.86
(2.3) (34.5) (36.1) (37.6) (39.4) (40.9) (41.7) (43.9) (45.7) (47.2)
**Consult factory for additional entry sizes available.
TABLE III: FINISH
Symbol XM Finish Description 2000 Hour Corrosion Resistant Electroless Nickel 2000 Hour Corrosion Resistant Ni-PTFE, Nickel-Fluorocarbon Polymer. 1000 Hour GreyTM 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel
XMT
XW
Entry Code 04 05 07 09 11 13 15 16 17 20
TABLE IV: CABLE ENTRY
Entry Dia. ±.03 (0.8) .250 (6.4) .310 (7.9) .440 (11.2) .560 (14.2) .680 (17.3) .810 (20.6) .940 (23.9) 1.000 (25.4) 1.160 (29.5) 1.250 (31.8)
X Dia. ±.03 (0.8) .510 (13.0) .510 (13.0) .510 (13.0) .630 (16.0) .630 (16.0) .630 (16.0) .630 (16.0) .630 (16.0) .630 (16.0) .630 (16.0)
NOTES
1. 2. 3. 4. 5. 770-001S**-0 shrink boot supplied with T option. See shrink boot product page for more details. Consult factory for O-ring to be supplied with part less shrink boot. Metric dimensions (mm) are in parenthesis and are for reference only. Coupling nut supplied unplated. See Table I in Intro for front-end dimensional details.
© 2009 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-77
Composite Backshells
447-327 Composite Standard Profile EMI/RFI
A
B
C
D
E
F
G
很抱歉,暂时无法提供与“447SW327XM24”相匹配的价格&库存,您可以联系我们找货
免费人工找货