460FD002M20

460-002 EMI/RFI Non-Environmental G-Spring Backshell with Strain Relief Direct Coupling - Low Profile and Split 90° 460 A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 7 CONNECTOR DESIGNATORS * 460 F S 002 M 16 05 F 6 Product Series Connector Designator Angle and Profile A = 90 Solid B = 45 D = 90 Split S = Straight Basic Part No. Length * Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (F, G) Cable Entry (Tables IV, V) Shell Size (Table I) Finish (Table II) .690 (17.5) Max DIRECT COUPLING Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 5) A Thread (Table I) B (Table I) STYLE 2 (STRAIGHT See Note 1) * Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 5) J E (Table III) (Table V) Cable Range M (Table IV) Shown with Style F Strain Relief G J (Table III) (Table V) B (Table I) 90° SPLIT Shown with Style G Strain Relief Cable Range (Note 6) F (Table V) B (Table I) J K .880 (22.4) Max H (Table V) (Table III) (Table V) B (Table I) L (Table V) .416 (10.6) Max N (Table IV) 469-001-XX Shield Support Ring (order separately) is recommended for use in all G-Spring backshells (see page 463-8) CAGE Code 06324 90° SOLID Shown with Style F Strain Relief Shown with Style F Strain Relief © 2005 Glenair, Inc. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 460 - Page 6 with Strain Relief Direct Coupling - Low Profile and Split 90° See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: FRONT ADAPTER J Max - Conn. Designator A-D-E-F B-G-K J-H-L-S C 1.000 (25.4) 1.250 (31.8) 1.000 (25.4) 1.250 (31.8) 1.000 (25.4) 1.250 (31.8) 1.735 (44.1) 1.000 (25.4) 1.250 (31.8) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.687 (42.9) 1.915 (48.6) TABLE IV: CABLE ENTRY Cable Range N M Dash Max Max Min Max No. .843 (21.4) .625 (15.9) .156 (4.0) .250 (6.4) 01 .968 (24.6) .750 (19.1) .188 (4.8) .375 (9.5) 02 03 1.046 (26.6) .875 (22.2) .250 (6.4) .438 (11.1) 04 1.156 (29.4) 1.000 (25.4) .280 (7.1) .500 (12.7) 05 1.218 (30.9) 1.125 (28.6) .375 (9.5) .625 (15.9) 06 1.343 (34.1) 1.250 (31.8) .500 (12.7) .750 (19.1) 07 1.468 (37.3) 1.375 (34.9) .625 (15.9) .875 (22.2) 08 1.593 (40.5) 1.500 (38.1) .750 (19.1) 1.000 (25.4) 09 1.718 (43.6) 1.625 (41.3) .875 (22.2) 1.125 (28.6) 10 1.843 (46.8) 1.750 (44.5) 1.000 (25.4) 1.250 (31.8) 11* 2.187 (55.5) 1.875 (47.6) 1.125 (28.6) 1.375 (34.9) 12* 2.312 (58.7) 2.000 (50.8) 1.250 (31.8) 1.500 (38.1) 13* 2.437 (61.9) 2.125 (54.0) 1.375 (34.9) 1.625 (41.3) 14* 2.546 (64.7) 2.250 (57.2) 1.500 (38.1) 1.750 (44.5) * Consult factory for availability Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 Dash No. 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1. 2. 3. 4. E Max .680 (17.3) .750 (19.1) .810 (20.6) .870 (22.1) .930 (23.6) 1.000 (25.4) 1.060 (26.9) 1.120 (28.4) 1.180 (30.0) 1.180 (30.0) 1.312 (33.3) 1.562 (39.7) 1.562 (39.7) 1.688 (42.9) F Max .560 (14.2) .620 (15.7) .690 (17.5) .720 (18.3) .820 (20.8) .880 (22.4) .940 (23.9) 1.000 (25.4) 1.060 (26.9) 1.060 (26.9) 1.219 (31.0) 1.438 (36.5) 1.438 (36.5) 1.656 (42.1) TABLE V: DIMENSIONS H G Max Max 1.670 (42.4) .636 (16.2) 1.790 (45.5) .710 (18.0) 1.810 (46.0) .734 (18.6) 1.880 (47.8) .825 (21.0) 1.970 (50.0) .988 (25.1) 2.140 (54.4) 1.087 (27.6) 2.140 (54.4) 1.087 (27.6) 2.250 (57.2) 1.325 (33.7) 2.250 (57.2) 1.325 (33.7) 2.420 (61.5) 1.337 (34.0) 2.670 (67.8) 1.827 (46.4) 2.670 (67.8) 1.827 (46.4) 2.670 (67.8) 2.027 (51.5) 2.670 (67.8) 2.027 (51.5) K Max .630 (16.0) .630 (16.0) .692 (17.6) .755 (19.2) .848 (21.5) 1.036 (26.3) 1.036 (26.3) 1.130 (28.7) 1.130 (28.7) 1.255 (31.9) 1.317 (33.5) 1.317 (33.5) 1.348 (34.2) 1.348 (34.2) L Max 1.720 (43.7) 1.720 (43.7) 1.780 (45.2) 1.870 (47.5) 1.980 (50.3) 2.170 (55.1) 2.170 (55.1) 2.320 (58.9) 2.320 (58.9) 2.370 (60.2) 2.470 (62.7) 2.470 (62.7) 2.560 (65.0) 2.560 (65.0) Shield Support Ring (469-001-XX) is recommended for use in all G-Spring backshells (see page 463-8). When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. Angular Function S only. Metric dimensions (mm) are indicated in parentheses. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 5. Consult factory for shorter lengths on straight backshells. 6. Maximum cable entry available for split elbow is 1.188 (30.2). 7. When using Connector Designator B refer to pages 18 and 19 for part number development. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 460 - Page 7 460 460-002 EMI/RFI Non-Environmental G-Spring Backshell