460GH003M13

460-003 EMI/RFI Non-Environmental G-Spring Backshell with Strain Relief Rotatable Coupling - Standard Profile 460 G S 003 M 17 10 F 6 460 CONNECTOR DESIGNATOR Product Series Connector Designator Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (F, G) G ROTATABLE COUPLING Angle and Profile H = 45 J = 90 S = Straight Basic Part No. Cable Entry (Table IV) Shell Size (Table I) Finish (Table II) Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 5) A Thread (Table I) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 5) .690 (17.5) Max C Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) Cable M Range (Table IV) Length ± .060 (1.52) 1.25 (31.8) Max E (Table III) G (Table III) F (Table III) STYLE 2 (45° & 90° See Note 1) Now Available with the NESTOR H (Table III) N (Table IV) Add “-445” to Specify Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. See Page 41 for Details. 469-001-XX Shield Support Ring (order separately) is recommended for use in all G-Spring backshells (see page 463-8) CAGE Code 06324 Printed in U.S.A. © 2005 Glenair, Inc. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 460 - Page 8 with Strain Relief Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS F G E Max Max Max .980 (24.9) 1.380 (35.1) 1.240 (31.5) 1.000 (25.4) 1.440 (36.6) 1.260 (32.0) 1.030 (26.2) 1.500 (38.1) 1.290 (32.8) 1.050 (26.7) 1.570 (39.9) 1.310 (33.3) 1.080 (27.4) 1.630 (41.4) 1.340 (34.0) 1.120 (28.4) 1.730 (43.9) 1.380 (35.1) 1.150 (29.2) 1.800 (45.7) 1.410 (35.8) 1.320 (33.5) 2.040 (51.8) 1.580 (40.1) 1.360 (34.5) 2.130 (54.1) 1.620 (41.1) Shell Size 11 13 15 17 19 23 25 29 33 H Max 1.120 (28.4) 1.180 (30.0) 1.250 (31.8) 1.310 (33.3) 1.390 (35.3) 1.470 (37.3) 1.540 (39.1) 1.780 (45.2) 1.870 (47.5) TABLE IV: CABLE ENTRY Cable N M Dash Min Max Max No. .625 (15.9) .156 (4.0) .843 (21.4) 01 .750 (19.1) .188 (4.8) .968 (24.6) 02 .875 (22.2) .250 (6.4) 03 1.046 (26.6) 04 1.156 (29.4) 1.000 (25.4) .280 (7.1) 05 1.218 (30.9) 1.125 (28.6) .375 (9.5) 06 1.343 (34.1) 1.250 (31.8) .500 (12.7) 07 1.468 (37.3) 1.375 (34.9) .625 (15.9) 08 1.593 (40.5) 1.500 (38.1) .750 (19.1) 09 1.718 (43.6) 1.625 (41.3) .875 (22.2) 10 1.843 (46.8) 1.750 (44.5) 1.000 (25.4) 11* 2.187 (55.5) 1.875 (47.6) 1.125 (28.6) 12* 2.312 (58.7) 2.000 (50.8) 1.250 (31.8) 13* 2.437 (61.9) 2.125 (54.0) 1.375 (34.9) 14* 2.546 (64.7) 2.250 (57.2) 1.500 (38.1) * Consult factory for availability Range Max .250 (6.4) .375 (9.5) .438 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1. Shield Support Ring (469-001-XX) is recommended for use in all G-Spring backshells (see page 463-8). 2. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 3. Metric dimensions (mm) are indicated in parentheses. 4. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 5. Consult factory for shorter lengths on straight backshells. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 460 - Page 9 460 460-003 EMI/RFI Non-Environmental G-Spring Backshell