460HD001M14

460-001 EMI/RFI Non-Environmental G-Spring Backshell with Strain Relief Rotatable Coupling - Low Profile 460 F S 001 M 16 05 F 6 460 CONNECTOR DESIGNATORS Product Series Connector Designator Angle and Profile A = 90 Solid B = 45 D = 90 Split S = Straight Basic Part No. A-F-H-L-S ROTATABLE COUPLING Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (F, G) Cable Entry (Table IV) Shell Size (Table I) Finish (Table II) Length * .690 (17.5) Max Length ± .060 (1.52) Minimum Order Length 2.0 Inch (See Note 5) A Thread (Table I) C Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) .88 (22.4) Max Cable Range M (Table IV) * Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 5) E (Table III) Shown with Style F Strain Relief G (Table III) F (Table III) STYLE 2 (45° & 90° See Note 1) K (Table III) 90° SPLIT Shown with Style G Strain Relief L (Table III) .880 (22.4) H (Table III) Cable Range (Note 6) .416 (10.6) Max 90° SOLID Shown with Style F Strain Relief N (Table IV) 469-001-XX Shield Support Ring (order separately) is recommended for use in all G-Spring backshells (see page 463-8) Shown with Style F Strain Relief © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 460 - Page 4 with Strain Relief Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 08 09 11 10 13 12 14 15 17 16 18 19 21 20 22 23 25 24 28 32 36 E Max .680 (17.3) .750 (19.1) .810 (20.6) .870 (22.1) .930 (23.6) 1.000 (25.4) 1.060 (26.9) 1.120 (28.4) 1.180 (30.0) 1.312 (33.3) 1.562 (39.7) 1.688 (42.9) F Max .560 (14.2) .620 (15.7) .690 (17.5) .720 (18.3) .820 (20.8) .880 (22.4) .940 (23.9) 1.000 (25.4) 1.060 (26.9) 1.219 (31.0) 1.483 (37.7) 1.656 (42.1) G Max .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) H Max 1.670 (42.4) 1.790 (45.5) 1.810 (46.0) 1.880 (47.8) 1.970 (50.0) 2.140 (54.4) 2.140 (54.4) 2.250 (57.2) 2.250 (57.2) 2.420 (61.5) 2.670 (67.8) 2.670 (67.8) K Max .413 (10.5) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) L Max 1.720 (43.7) 1.720 (43.7) 1.780 (45.2) 1.870 (47.5) 1.980 (50.3) 2.170 (55.1) 2.170 (55.1) 2.320 (58.9) 2.320 (58.9) 2.370 (60.2) 2.470 (62.7) 2.560 (65.0) TABLE IV: CABLE ENTRY Cable N M Dash Min Max Max No. .625 (15.9) .156 (4.0) .843 (21.4) 01 .750 (19.1) .188 (4.8) .968 (24.6) 02 .875 (22.2) .250 (6.4) 03 1.046 (26.6) 04 1.156 (29.4) 1.000 (25.4) .280 (7.1) 05 1.218 (30.9) 1.125 (28.6) .375 (9.5) 06 1.343 (34.1) 1.250 (31.8) .500 (12.7) 07 1.468 (37.3) 1.375 (34.9) .625 (15.9) 08 1.593 (40.5) 1.500 (38.1) .750 (19.1) 09 1.718 (43.6) 1.625 (41.3) .875 (22.2) 10 1.843 (46.8) 1.750 (44.5) 1.000 (25.4) 11* 2.187 (55.5) 1.875 (47.6) 1.125 (28.6) 12* 2.312 (58.7) 2.000 (50.8) 1.250 (31.8) 13* 2.437 (61.9) 2.125 (54.0) 1.375 (34.9) 14* 2.546 (64.7) 2.250 (57.2) 1.500 (38.1) * Consult factory for availability Range Max .250 (6.4) .375 (9.5) .438 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1. Shield Support Ring (469-001-XX) is recommended for use in all G-Spring backshells (see page 463-8). 2. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G, H, K and L will not apply. Please consult factory. 3. Metric dimensions (mm) are indicated in parentheses. 4. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 5. Consult factory for shorter lengths on straight backshells. 6. Maximum cable entry available for split elbow is 1.188 (30.2). © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 460 - Page 5 460 460-001 EMI/RFI Non-Environmental G-Spring Backshell