463AA001M36

463-001 EMI/RFI Environmental G-Spring Backshell with Strain Relief Rotatable Coupling - Low Profile 463 F S 001 M 16 05 F 6 463 CONNECTOR DESIGNATORS Product Series Connector Designator Angle and Profile A = 90 B = 45 S = Straight Basic Part No. A-F-H-L-S ROTATABLE COUPLING Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (F, G) Cable Entry (Table IV) Shell Size (Table I) Finish (Table II) Length ± .060 (1.52) Minimum Order Length 2.0 Inch (See Note 5) A Thread (Table I) Length * 1.22 (31.0) Max C Typ. (Table I) Cable Range M (Table IV) STYLE 2 (STRAIGHT See Note 1) * Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 5) Shown with Style F Strain Relief .88 (22.4) Max E (Table III) F (Table III) G (Table III) STYLE 2 (45° & 90° See Note 1) H (Table III) 469-001-XX Shield Support Ring (order separately) is recommended for use in all G-Spring backshells (see page 463-8) Shown with Style F Strain Relief Shown with Style G Strain Relief N (Table IV) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 463 - Page 2 with Strain Relief Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 28 32 36 E Max .413 (10.5) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) F Max 1.720 (43.7) 1.720 (43.7) 1.780 (45.2) 1.870 (47.5) 1.980 (50.3) 2.170 (55.1) 2.170 (55.1) 2.320 (58.9) 2.320 (58.9) 2.370 (60.2) 2.470 (62.7) 2.560 (65.0) G Max .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) H Max 1.670 (42.4) 1.790 (45.5) 1.810 (46.0) 1.880 (47.8) 1.970 (50.0) 2.140 (54.4) 2.140 (54.4) 2.250 (57.2) 2.250 (57.2) 2.420 (61.5) 2.670 (67.8) 2.670 (67.8) Dash No. 01 02 03 04 05 06 07 08 09 10 11* 12* 13* 14* M Max .843 (21.4) .968 (24.6) 1.046 (26.6) 1.156 (29.4) 1.218 (30.9) 1.343 (34.1) 1.468 (37.3) 1.593 (40.5) 1.718 (43.6) 1.843 (46.8) 2.187 (55.5) 2.312 (58.7) 2.437 (61.9) 2.546 (64.7) TABLE IV: CABLE ENTRY Cable N Min Max .625 (15.9) .125 (3.2) .750 (19.1) .156 (4.0) .875 (22.2) .250 (6.4) 1.000 (25.4) .280 (7.1) 1.125 (28.6) .375 (9.5) 1.250 (31.8) .500 (12.7) 1.375 (34.9) .625 (15.9) 1.500 (38.1) .750 (19.1) 1.625 (41.3) .875 (22.2) 1.750 (44.5) 1.000 (25.4) 1.875 (47.6) 1.125 (28.6) 2.000 (50.8) 1.250 (31.8) 2.125 (54.0) 1.375 (34.9) 2.250 (57.2) 1.500 (38.1) Range Max .250 (6.4) .375 (9.5) .438 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) * Consult factory for availability 1. Shield Support Ring (469-001-XX) is recommended for use in all G-Spring backshells (see page 463-8). 2. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 3. Metric dimensions (mm) are indicated in parentheses. 4. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 5. Consult factory for shorter lengths on straight backshells. 6. O-Ring not supplied with Connector Designator A. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 463 - Page 3 463 463-001 EMI/RFI Environmental G-Spring Backshell