463GH003M29

463-003 EMI/RFI Environmental G-Spring Backshell with Strain Relief Rotatable Coupling - Standard Profile 463 G S 003 M 17 10 F 6 463 CONNECTOR DESIGNATOR Product Series Connector Designator Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (F, G) G ROTATABLE COUPLING Angle and Profile H = 45 J = 90 S = Straight Basic Part No. Length * Cable Entry (Table IV) Shell Size (Table I) Finish (Table II) 1.22 (31.0) Max Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 5) A Thread (Table I) C Typ. (Table I) M Cable Range (Table IV) STYLE 2 (STRAIGHT See Note 1) Length ± .060 (1.52) 1.25 (31.8) Max * Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 5) Shown with Style F Strain Relief E (Table III) F (Table III) G (Table III) STYLE 2 (45° & 90° See Note 1) 469-001-XX Shield Support Ring (order separately) is recommended for use in all G-Spring backshells (see page 463-8) Shown with Style F Strain Relief Add “-445” to Specify Glenair’s Non-Detent, ("NESTOR") Spring-Loaded, Self-Locking Coupling. See Page 41 for Details. H (Table III) 1.000 (25.4) Max Shown with Style G Strain Relief N (Table IV) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 463 - Page 6 with Strain Relief Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS F G E Max Max Max 1.630 (41.4) 1.380 (35.1) 1.240 (31.5) 1.650 (41.9) 1.440 (36.6) 1.260 (32.0) 1.680 (42.7) 1.500 (38.1) 1.290 (32.8) 1.700 (43.2) 1.570 (39.9) 1.310 (33.3) 1.730 (43.9) 1.630 (41.4) 1.340 (34.0) 1.770 (45.0) 1.730 (43.9) 1.380 (35.1) 1.800 (45.7) 1.800 (45.7) 1.410 (35.8) 1.970 (50.0) 2.040 (51.8) 1.580 (40.1) 2.010 (51.1) 2.130 (54.1) 1.620 (41.1) Shell Size 11 13 15 17 19 23 25 29 33 H Max 1.770 (45.0) 1.830 (46.5) 1.900 (48.3) 1.960 (49.8) 2.040 (51.8) 2.120 (53.3) 2.190 (53.8) 2.430 (61.7) 2.520 (64.0) TABLE IV: CABLE ENTRY Cable N M Dash Min Max Max No. .625 (15.9) .125 (3.2) .843 (21.4) 01 .750 (19.1) .156 (4.0) .968 (24.6) 02 .875 (22.2) .250 (6.4) 03 1.046 (26.6) 04 1.156 (29.4) 1.000 (25.4) .280 (7.1) 05 1.218 (30.9) 1.125 (28.6) .375 (9.5) 06 1.343 (34.1) 1.250 (31.8) .500 (12.7) 07 1.468 (37.3) 1.375 (34.9) .625 (15.9) 08 1.593 (40.5) 1.500 (38.1) .750 (19.1) 09 1.718 (43.6) 1.625 (41.3) .875 (22.2) 10 1.843 (46.8) 1.750 (44.5) 1.000 (25.4) 11* 2.187 (55.5) 1.875 (47.6) 1.125 (28.6) 12* 2.312 (58.7) 2.000 (50.8) 1.250 (31.8) 13* 2.437 (61.9) 2.125 (54.0) 1.375 (34.9) 14* 2.546 (64.7) 2.250 (57.2) 1.500 (38.1) * Consult factory for availability Range Max .250 (6.4) .375 (9.5) .438 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1. Shield Support Ring (469-001-XX) is recommended for use in all G-Spring backshells (see page 463-8). 2. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 3. Metric dimensions (mm) are indicated in parentheses. 4. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 5. Consult factory for shorter lengths on straight backshells. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 463 - Page 7 463 463-003 EMI/RFI Environmental G-Spring Backshell