507-195M10002EG

MIL-DTL-83513 Micro-D 507-195 EMI/RFI Micro-D Split Backshell Assembly with Clamp and Gland Nut Style Strain-Relief F Cable Range Typ Shell I.D. Typ G .079 (2.0) .573 (14.6) 1.060 (26.9) Max .140/.130 (3.6/3.3) Extended Jackscrew See How to Order E Thread Typ (See Note 3) Connector Shown for Reference Only A Female Jackpost - Symbol F See How to Order Fixed Female Jackpost - Symbol FF See How to Order .187 (4.7) .060 (1.5) 1.320 (33.5) Max Style E Strain Relief .130 (3.3) See Note 3 D Ref Style G Gland Nut C B HOW TO ORDER Series/ Basic Number 507-195 Finish Symbol (Table III) Shell Size (Table I) 09 15 21 25 31 37 51 100 Dash No. (Table II) Jackscrew Option* E – Extended Jackscrew F – Female Jackpost FE – Extended Female Jackpost FF – Fixed Female Jackpost Omit for Standard Gland Nut or Strain Relief G – Gland Nut E – Strain Relief Sample Part Number: 507-195 M 21 02 E G * SEE PAGE C-4 FOR COMPLETE INFORMATION NOTES: 1. Metric dimensions (mm) are indicated in parentheses. 2. Accommodates MS3109 through MS3117 and M85049/68 Lipped-Type Shrink Boots. 3. Jackscrew and Jackpost to float allowing Connector to engage prior to Jackscrew. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com C-44 507-195 EMI-RFI Micro-D Split Backshell Assembly with Clamp and Gland Nut Style Strain-Relief TABLE I: SHELL SIZE, CABLE ENTRY, BACKSHELL & CONNECTOR INTERFACE DIMENSIONS Shell Size 09 15 21 25 31 37 51 100 A Max .915 (23.4) 1.065 (27.1) 1.215 (30.9) 1.315 (33.4) 1.465 (37.2) 1.615 (41.0) 1.565 (39.8) 2.305 (51.7) B +.005 (0.13) .565 (14.4) .715 (18.2) .865 (22.0) .965 (24.5) 1.115 (28.3) 1.265 (32.1) 1.215 (30.9) 1.800 (45.7) C Max .281 (7.1) .281 (7.1) .281 (7.1) .281 (7.1) .281 (7.1) .281 (7.1) .312 (7.9) .360 (9.1) D Dia .450 (11.4) .450 (11.4) .450 (11.4) .450 (11.4) 450 (11.4) .450 (11.4) .495 (12.6) .540 (13.7) E +.010 (0.25) .701 (17.8) .763 (19.4) .795 (20.4) .857 (21.8) .888 (22.6) .951 (24.2) 1.013 (25.7) 1.076 (27.3) E Thread 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 4-40 UNC-2A Shell I.D. .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .360 (9.1) .400 (10.2) TABLE II: DASH NUMBER AND CABLE ENTRY Dash No. 02 03 04 Clamp Range Min Max .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .312 (7.9) .500 (12.7) F Dia Max .968 (24.6) 1.046 (9.5) 1.156 (29.4) G Max .515 (13.1) .640 (16.3) .765 (19.4) TABLE III: FINISH OPTIONS Symbol B C* G* J LF M N NC NF T U** ZN Finish Cadmium Plate/Olive Drab Black Anodize Anodic Hard Coat Gold Iridite over Cadmium Plate over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Electroless Nickel Cadmium Plate/Olive Drab over Electroless Nickel Zinc Cobalt/Dark Olive Drab Cadmium Plate/Olive Drab over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Cadmium Plate/Black Zinc-Nickel Alloy/Olive Drab *Anodize finish is not suitable for EMI shielding or grounding applications. **Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. NOTES: 1. Metric dimensions (mm) are indicated in parentheses. 2. Accommodates MS3109 through MS3117 and M85049/68 Lipped-Type Shrink Boots. 3. Jackscrew and Jackpost to float allowing Connector to engage prior to Jackscrew. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com C-45 MIL-DTL-83513 Micro-D