527-047LFP2

527-047 Multi-Function Backshell for Size 2 ARINC 600 Series Connector 527-047 N F P 0 1 0 3 0 5 A Basic Part No. Finish (Table III) Connector Designator (Table IV) Dash No. (Table I) Position 1 Dash No. (Table I) Position 2 Dash No. (Table I) Position 3 Height Code (Table II) 45° Chamfer Both Ends ARINC 600 Backshells A Outlet Type C Shown Position 3 Mounting Hardware Supplied - 10 Places Outlet Type H Shown Position 2 5.61 (142.5) Outlet Type B (Accomodates 600-052 Bands) 35° Position 1 Chamfer 4 Places H A Metric dimensions (mm) are indicated in parentheses. 1.79 (45.5) View A-A © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com F-8 for Size 2 ARINC 600 Series Connector TABLE I: CABLE ENTRY Outlet Type B B H H C C Omit Dash No. 01 02 03* 04** 05 06 07 Cable Entry Max .500 (12.7) 1.000 (25.4) .346 (8.8) .840 (21.3) .312 (7.9) .594 (15.1) N/A 1. Metric dimensions (mm) are indicated in parentheses. 2. Material/Finish: Backshell and Fittings = Al Alloy/See Table II Hardware = SST/Passivate 3. Height code C not available with P2 or P6 connectors. * Dash No. 03 mates with MIL-C-38999 Series III and IV Size 09 Accessories ** Dash No. 04 mates with MIL-C-38999 Series III and IV Size 17 Accessories TABLE III: FINISH OPTIONS Symbol B C* G* J LF M N Finish Cadmium Plate/Olive Drab Black Anodize Anodic Hard Coat Gold Iridite over Cadmium Plate over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Electroless Nickel Cadmium Plate/Olive Drab over Electroless Nickel Symbol NC NF T U** ZN Finish Zinc Cobalt/Dark Olive Drab Cadmium Plate/Olive Drab over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Cadmium Plate/Black Zinc-Nickel Alloy/Olive Drab TABLE II Height Code A B C D 1.00 1.25 .44 .84 H (25.4) (31.8) (11.2) (21.3) *Anodize finish is not suitable for EMI shielding or grounding applications. **Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. TABLE IV: CONNECTOR DESIGNATOR ARINC 600 series connector backshells are designed to replace the insert retainer plates. Due to non-standard modifications by the connector manufacturer, the backshell may require special design alterations to mate properly. The following should be used to determine if a backshell modification is required. Prior to ordering, consult factory with connector part numbers not shown to ensure a proper fit. Connector Designator P Connector Description All Manufacturer’s Plug and Receptacle Shells, Except for Those Listed Below (Prior to ordering, consult factory with connector part numbers not listed below to ensure a proper fit.) Cannon BKAD****322 Series Plug Cannon/Radiall Environmental Plug Cannon/Boeing BACC 66 Plug Radiall/Boeing BACC66 Plug Cannon BKAC & BKAE XXX322 Series Environmental Plug CAGE Code 06324 Printed in U.S.A. P1 P2 P3 P5 P6 © 2004 Glenair, Inc. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com F-9 ARINC 600 Backshells 527-047 Multi-Function Backshell