527-056ZNP6

527-056 EMI/RFI Strain-Relief Backshell for Size 1 ARINC 600 Series Connector 527-056 N F P 1 0 3 0 4 0 5 A Basic Part No. Finish (Table III) Connector Designator (Table IV) Dash No. (Table I) Position 1 Dash No. (Table I) Position 2 Dash No. (Table I) Position 3 Height Code (Table II) ARINC 600 Backshells A H .703 (17.9) .693 (17.6) Position 3 6.11 (155.2) 1.646 (41.8) 1.638 (41.6) .480 (12.2) .470 (11.9) 1.768 1.567 (39.8) (44.9) 1.558 (39.6) 1.760 2 Places (44.7) 1.62 (41.1) Max .434 (11.0) .424 (10.8) 5.61 (142.5) Position 2 M Typ. Captivated Screws Typ. Position 1 .751 (19.1) .743 (18.9) Cable Range Typ. 1.314 (33.4) 1.306 (33.2) 1.130 (28.7) 1.120 (28.4) .85 (21.6) Max Typ. Mfg’s Option .99 (25.1) A View A-A Metric dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com F-2 for Size 1 ARINC 600 Series Connector TABLE I: CABLE ENTRY Dash No. 00 * 01 02 03 04 05 M Max N/A .781 (19.8) .968 (24.6) 1.046 (26.6) 1.156 (29.4) 1.218 (30.9) Cable Range Min Max N/A N/A .062 (1.6) .125 (3.2) .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .375 (9.5) .500 (12.7) .500 (12.7) .625 (15.9) TABLE III: FINISH OPTIONS Symbol B C* G* J LF M N NC NF T U** ZN Finish Cadmium Plate/Olive Drab Black Anodize Anodic Hard Coat Gold Iridite over Cadmium Plate over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Electroless Nickel Cadmium Plate/Olive Drab over Electroless Nickel Zinc Cobalt/Dark Olive Drab Cadmium Plate/Olive Drab over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Cadmium Plate/Black Zinc-Nickel Alloy/Olive Drab * Clamp not supplied with dash number 00. TABLE II Height H Code 1.00 (25.4) A 1.25 (31.8) B *Anodize finish is not suitable for EMI shielding or grounding applications. **Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. TABLE IV: CONNECTOR DESIGNATOR ARINC 600 series connector backshells are designed to replace the insert retainer plates. Due to non-standard modifications by the connector manufacturer, the backshell may require special design alterations to mate properly. The following should be used to determine if a backshell modification is required. Prior to ordering, consult factory with connector part numbers not shown to ensure a proper fit. Connector Designator P Connector Description All Manufacturer’s Plug and Receptacle Shells, Except for Those Listed Below (Prior to ordering, consult factory with connector part numbers not listed below to ensure a proper fit.) Cannon BKAD****322 Series Plug Cannon/Radiall Environmental Plug Cannon/Boeing BACC 66 Plug Radiall/Boeing BACC66 Plug Cannon BKAC & BKAE XXX322 Series Environmental Plug P1 P2 P3 P5 P6 1. Metric dimensions (mm) are indicated in parentheses. 2. Material/Finish: Backshell and Fittings = Al Alloy/See Table II Hardware = SST/Passivate © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com F-3 ARINC 600 Backshells 527-056 EMI/RFI Strain-Relief Backshell