ARINC 600 Backshells
527-108 EMI/RFI Banding Backshell
for Size 3 ARINC 600 Series Connector
527-108 N F P A 4 B 4 C 4 D 4 E 4 F 4 B Basic Part No. Finish (Table II) Connector Designator (Table III) B = Band(s) Supplied 600-052, One Per Entry Location, Omit for None Position and Dash No. (Table I) Omit Unwanted Positions
Shield Termination Area Typ. Position E Position F
1.60 (40.6)
1.50 (38.1)
A
3.25 (82.6)
Position C
Position D
5.61 (142.5) Position B
Position A
Entry Dia (Typ)
Jam Nut (Typ)
A
View A-A
Metric dimensions (mm) are indicated in parentheses.
© 2004 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com F-18
527-108 EMI/RFI Banding Backshell
for Size 3 ARINC 600 Series Connector
TABLE I: CABLE ENTRY
Dash Entry No. Dia 4 .50 (12.7) 5 .63 (16.0) 6 .75 (19.1) 7 .88 (22.4) 8 1.00 (25.4) 9 1.13 (28.7)
TABLE II: FINISH OPTIONS
Symbol B C* G* J LF M N Finish Symbol Finish Cadmium Plate/Olive Drab NC Zinc Cobalt/Dark Olive Drab Black Anodize NF Cadmium Plate/Olive Drab over Anodic Hard Coat Electroless Nickel Gold Iridite over Cadmium Plate T Cadmium Plate/Bright over over Electroless Nickel Electroless Nickel Cadmium Plate/Bright over U** Cadmium Plate/Black Electroless Nickel ZN Zinc-Nickel Alloy/Olive Drab *Anodize finish is not suitable for EMI shielding or grounding Electroless Nickel Cadmium Plate/Olive Drab over applications. to corrosion resisting steel backshells and **Applicable Electroless Nickel accessories. Consult factory for other available finishes.
TABLE III: CONNECTOR DESIGNATOR
ARINC 600 series connector backshells are designed to replace the insert retainer plates. Due to non-standard modifications by the connector manufacturer, the backshell may require special design alterations to mate properly. The following should be used to determine if a backshell modification is required. Prior to ordering, consult factory with connector part numbers not shown to ensure a proper fit. Connector Designator P
Connector Description All Manufacturer’s Plug and Receptacle Shells, Except for Those Listed Below (Prior to ordering, consult factory with connector part numbers not listed below to ensure a proper fit.) Cannon BKAD****322 Series Plug Cannon/Radiall Environmental Plug Cannon/Boeing BACC 66 Plug Radiall/Boeing BACC66 Plug Cannon BKAC & BKAE XXX322 Series Environmental Plug
P1 P2 P3 P5 P6
1. Metric dimensions (mm) are indicated in parentheses. 2. Material/Finish: Backshell, Fittings, Nuts, Clamps = Al Alloy/See Table II; Hardware = SST/Passivate
© 2004 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com F-19
ARINC 600 Backshells
很抱歉,暂时无法提供与“527-108MP1”相匹配的价格&库存,您可以联系我们找货
免费人工找货