527-186N16B

527-186 Split Backshell and Shorting Cap for Cannon DPKA and DPKB Series Connectors 527-186 M 1 6 A 1 A Basic Part No. Finish Symbol (Table III) Dash No. (Table II, Note 3) Connector Symbol (Table I) Backshell Style: A or B (Style B Available on Connector Sym B Only), Omit for Shorting Backshell 1 = With RFI/EMI Gaskets, 2 = Without RFI/EMI Gaskets ARINC Series 400 (Cannon) .750 (19.1) Max Dia Though Backshell MS3155 Interface Offset MS3155 Interface Cable Entry Typ. A Thread Typ. RFI/EMI Entry Gasket Typ. Backshell Style A 2.41 (61.2) Max Typ. 2.00 (50.8) Typ. Backshell Style B #4-40 UNC x 7/16 (4 Places) Typ. RFI/EMI Gasket Typ. RFI/EMI Gasket Typ. 1.031 (26.2) .969 (24.6) Typ. D Radius (2 Places) .13 (3.3) Elongated Hole - Ref. .813 (20.7) B Typ. A Typ. Shorting Backshell Style S © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com G-6 527-186 Split Backshell and Shorting Cap for Cannon DPKA and DPKB Series Connectors TABLE I: CONNECTOR INTERFACE DIMS Connector Connector Symbol Series A DPKA B DPKB/DPJM A ±.062 (1.6) 2.095 (53.2) 3.395 (86.2) B ±.005 (.1) 1.895 (48.1) 3.195 (81.2) TABLE II: CABLE ENTRY Dash A Thread No. Class 2A 00 * n/a 08 1/2 - 30 UNF 10 5/8 - 24 UNF 12 3/4 - 20 UNEF 14 7/8 - 20 UNEF 16 1 - 20 UNEF 18 1 1/16 - 18 UNEF 20 1 3/16 - 18 UNEF * See Note 3 Cable Entry Max n/a .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .750 (19.1) .750 (19.1) D Radius n/a .125 (3.2) .188 (4.8) .250 (6.4) .312 (7.9) .375 (9.5) .375 (9.5) .375 (9.5) TABLE III - FINISH OPTIONS Symbol B J M N NF T Finish Cadmium Plate, Olive Drab Iridite, Gold Over Cadmium Plate over Nickel Electroless Nickel Cadmium Plate, Olive Drab, Over Nickel Cadmium Plate, Olive Drab, Over Electroless Nickel (500 Hour Salt Spray) Cadmium Plate, Bright Dip Over Nickel (500 Hour Salt Spray) CONSULT FACTORY FOR OTHER AVAILABLE FINISHES 1. Metric dimensions (mm) are indicated in parentheses. 2. Backshell replaces connector rear bracket. 3. When Backshell Style S is ordered, insert “00” in place of Dash No. 4. Material/Finish: Adapter and Backshell = Al Alloy/Table III Hardware = SST/Passivate Backshell and Entry Gaskets = Metalastic/N.A. Interface Gasket = Monel Mesh/N.A. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com G-7 ARINC Series 400 (Cannon)