527193ZNA01

527-193 EMI/RFI Backshell Assembly for Size 3 ARINC 600 Series Connectors ARINC 600 Backshells 527 1 93 M A 10 B 10 C 10 C Product Series Basic Number Finish (Table II) Dash No. Position A (Table I) Dash No. Position C (Table I) Dash No. Position B (Table I) C = Cable Clamp N = No Cable Clamp .120 (3.0) 3.120 (79.28) Position A Position B 5.618 (142.7) 4.683 (118.9) 2.809 (71.3) C 5.350 (135.91) 3.765 (95.6) Position C .100 (2.5) 1.999 (50.8) .935 (23.7) 2.870 (72.9) 4.880 (124.0 Ref) 4.320 (109.7) .320 (8.1) Metric dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com F-22 for Size 3 ARINC 600 Series Connectors TABLE I: CABLE ENTRY Dash Cable Range_______ No. Min Max 01 .062 (1.6) .125 (3.2) 02 .125 (3.2) .250 (6.4) 03 .157 (4.0) .375 (9.5) 04 .282 (7.2) .500 (12.7 .625 (15.9) 05 .407 (10.3) 06 .532 (13.5) .750 (19.1) .657 (16.7) .875 (22.2) 07 .782 (19.9) 1.000 (25.4) 08 09 .907 (23.0) 1.125 (28.6) 1.032 (26.2) 1.250 (31.8) 10 X Dia .620 (15.7) .750 (19.1) .870 (22.1) 1.000 (25.4) 1.120 (28.4) 1.250 (31.8) 1.370 (34.8) 1.500 (38.1) 1.620 (41.1) 1.750 (44.5) TABLE II: FINISH OPTIONS Symbol B C* G* J LF M N NC NF T U** ZN Finish Cadmium Plate/Olive Drab Black Anodize Anodic Hard Coat Gold Iridite over Cadmium Plate over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Electroless Nickel Cadmium Plate/Olive Drab over Electroless Nickel Zinc Cobalt/Dark Olive Drab Cadmium Plate/Olive Drab over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Cadmium Plate/Black Zinc-Nickel Alloy/Olive Drab *Anodize finish is not suitable for EMI shielding or grounding applications. **Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. TABLE III: CONNECTOR DESIGNATOR ARINC 600 series connector backshells are designed to replace the insert retainer plates. Due to non-standard modifications by the connector manufacturer, the backshell may require special design alterations to mate properly. The following should be used to determine if a backshell modification is required. Prior to ordering, consult factory with connector part numbers not shown to ensure a proper fit. Connector Designator P Connector Description All Manufacturer’s Plug and Receptacle Shells, Except for Those Listed Below (Prior to ordering, consult factory with connector part numbers not listed below to ensure a proper fit.) Cannon BKAD****322 Series Plug Cannon/Radiall Environmental Plug Cannon/Boeing BACC 66 Plug Radiall/Boeing BACC66 Plug Cannon BKAC & BKAE XXX322 Series Environmental Plug Metric dimensions (mm) are indicated in parentheses. P1 P2 P3 P5 P6 © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com F-23 ARINC 600 Backshells 527-193 EMI/RFI Backshell Assembly