550E002M

550-002 Environment Resisting EMI/RFI D-Subminiature Strain-Relief Split Backshell for Overall Shielding 550 T 0 02 M 2 F 0 B 1 L Basic Part No. Cable Entry Style T = Top S = Side E = End Basic Part Number Finish Symbol (Page 3) Shell Size (Table I) H Cable Range Style L Strain Relief 1. Metric dimensions (mm) are indicated in parentheses. 2. DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. 3. Overall shield. Thickness range: 0 to .062 (1.6) 1.940 (49.3) Max L = Strain Relief, G = Gland Nut 0 = Without EMI Gasket 1 = With EMI Gasket Jackscrew Type (Page A-4) Receptacle Mounting (Right Page) CC = Cable-to-Cable Mounting F0 = Front Mounting R1-R9 = Rear Mounting MIL-C-24308 D-Subminiature 1.940 (49.3) Max S SIDE ENTRY 1.190 (30.2) Max T TOP ENTRY J E END ENTRY EMI Gasket (Optional) Style G Gland Nut TABLE I: CABLE ENTRY & ENTRY STYLE Com’l H J Shell Shell Size Max Max Size Ref 1.046 (26.6) .843 (21.4) 1 E/09 1.046 (26.6) .843 (21.4) 2 A/15 1.156 (29.4) .968 (24.6) 3 B/25 1.156 (29.4) .968 (24.6) 4 C/37 1.218 (30.9) 1.109 (28.2) 5 D/50 1.594 (40.5) 1.468 (37.3) 6* F/104 * Shell Size 6 Available in Top Entry Only. Entry Styles S & T Cable Range Min Max .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .312 (7.9) .475 (12.1) .312 (7.9) .475 (12.1) .437 (11.1) .575 (14.6) .812 (20.6) 1.000 (25.4) Entry Style E Cable Range Min Max .250 (6.4) .375 (9.5) .250 (6.4) .375 (9.5) .312 (7.9) .475 (12.1) .312 (7.9) .475 (12.1) .437 (11.1) .575 (14.6) n/a n/a © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-12 D-Subminiature Split Backshells Standard Dimensions Termination Type P Jackscrew Types B, D, E, H, K (Page A-4) Jackscrew Types B, D, E, H, K (Page A-4) F R F E Jackscrew Types B, D, H, K and J Only (Page A-4) Termination Type S - SIDE ENTRY E T - TOP ENTRY Shrink Sleeve (As Required) A D C E - END ENTRY E A G B .12 (3.0) Ref. COMMON CONNECTOR/SHELL INTERFACE & BACKSHELL DIMENSIONS Com’l Shell Shell Size Ref Size E/09 1 A/15 2 B/25 3 C/37 4 D/50 5 F/104 6 A Max 1.393 (35.4) 1.706 (43.3) 2.265 (57.5) 2.900 (73.7) 2.800 (71.1) 2.900 (73.7) B Max .624 (15.8) .624 (15.8) .624 (15.8) .624 (15.8) .750 (19.1) .844 (21.4) D C Ref. .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .422 (10.7) ±.005 .984 1.312 1.852 2.500 2.406 2.500 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) (63.5) .730 1.050 1.594 2.240 2.140 2.240 P (18.5) (26.7) (40.5) (56.9) (54.4) (56.9) R Ref .719 (18.3) .719 (18.3) .938 (23.8) .938 (23.8) .938 (23.8) 1.094 (27.8) CABLE MOUNTING AND BACKSHELL DIMENSIONS Panel Dash No. Thickness n/a CC n/a F0 .031 (.8) R1 .047 (1.2) R2 .062 (1.6) R3 .093 (2.4) R4 .104 (2.6) R5 .125 (3.2) R6 .156 (4.0) R7 .135 (3.4) R8 .188 (4.8) R9 E .174 (4.4) .343 (8.7) .247 (6.3) .231 (5.9) .216 (5.5) .185 (4.7) .174 (4.4) .153 (3.9) .125 (3.2) .140 (3.6) .094 (2.4) Sizes 1 & 2 1.451 (36.9) 1.625 (41.3) 1.525 (38.7) 1.509 (38.3) 1.500 (38.1) 1.470 (37.3) 1.451 (36.9) 1.430 (36.3) 1.400 (35.6) 1.417 (36.0) 1.368 (34.7) F + .031 (0.79) Sizes 3 - 5 1.671 (42.4) 1.844 (46.8) 1.745 (44.3) 1.728 (43.9) 1.720 (43.7) 1.690 (42.9) 1.671 (42.4) 1.650 (41.9) 1.620 (41.1) 1.637 (41.6) 1.590 (40.4) Size 6 1.820 (46.2) 2.000 (50.8) 1.890 (48.0) 1.875 (47.6) 1.860 (47.2) 1.829 (46.5) 1.820 (46.2) 1.798 (45.7) 1.767 (44.9) 1.805 (45.8) 1.740 (44.2) G + .031 (0.79) Sizes 1 & 2 Sizes 3 - 5 1.583 (40.2) 1.831 (46.5) 1.750 (44.5) 2.000 (50.8) 1.656 (42.1) 1.904 (48.4) 1.640 (41.7) 1.888 (48.0) 1.625 (41.3) 1.873 (47.6) 1.594 (40.5) 1.842 (46.8) 1.583 (40.2) 1.831 (46.5) 1.563 (39.7) 1.811 (46.0) 1.531 (38.9) 1.781 (45.2) 1.550 (39.4) 1.798 (45.7) 1.500 (38.1) 1.750 (44.5) 1. Metric dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-13 MIL-C-24308 D-Subminiature