550E003M

550-003 EMI/RFI D-Subminiature Strain-Relief Split Backshell for Individual and Overall Shielding 550 T 0 03 M 2 F 0 B 1 F 0 2 Basic Part No. Cable Entry Style T = Top S = Side E = End Basic Part Number Finish Symbol (Page 3) Shell Size (Table I) Cable Entry Dash No. (Table II) F = Strain Relief, G = Gland Nut 0 = Without EMI Gasket, 1 = With EMI Gasket Jackscrew Type (Page A-4) Receptacle Mounting (Right Page) CC = Cable-to-Cable Mounting F0 = Front Mounting R1-R9 = Rear Mounting 1.380 (35.1) Max Cable Range Ferrule I.D. Typ. Shell I.D. Typ. 1.380 (35.1) Max Style F Strain Relief S SIDE ENTRY 1.100 (27.9) Max 1. Metric dimensions (mm) are indicated in parentheses. 2. DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. 3. Individual and overall shield. Thickness range: .031 (.8) to .188 (4.8). MIL-C-24308 D-Subminiature H T TOP ENTRY J E END ENTRY EMI Gasket (Optional) Style G Gland Nut TABLE I: SHELL SIZE & ENTRY STYLE TABLE II: BACKSHELL DIMENSIONS & CABLE ENTRY Ferrule I.D. .125 (3.2) .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) H J Dash Cable Range Com’l Min Max Max Max No. Shell Entry Style Entry Style 02 .968 (24.6) .781 (19.8) .125 (3.2) .250 (6.4) T (Ref) E Shell Size 03 1.046 (26.6) .906 (23.0) .250 (6.4) .375 (9.5) Shell I.D. Shell I.D. Size Ref 04 1.156 (29.4) 1.031 (26.2) .312 (7.9) .500 (12.7) E/09 .250 (6.4) .375 (9.5) 1 05 1.218 (30.9) 1.156 (29.4) .437 (11.1) .625 (15.9) A/15 .375 (9.5) .375 (9.5) 2 06 1.343 (34.1) 1.281 (32.5) .562 (14.3) .750 (19.1) B/25 .475 (12.1) .475 (12.1) 3 07* 1.468 (37.3) 1.406 (35.7) .687 (17.4) .875 (22.2) C/37 .475 (12.1) .475 (12.1) 4 08* 1.593 (40.5) 1.531 (38.9) .812 (20.6) 1.000 (25.4) D/50 .575 (14.6) .575 (14.6) 5 n/a 6* F/104 1.000 (25.4) * Available in Shell Size 6 Only * Shell Size 6 Available in Top Entry Only. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-14 D-Subminiature Split Backshells Standard Dimensions Termination Type P Jackscrew Types B, D, E, H, K (Page A-4) Jackscrew Types B, D, E, H, K (Page A-4) F R F E Jackscrew Types B, D, H, K and J Only (Page A-4) Termination Type S - SIDE ENTRY E T - TOP ENTRY Shrink Sleeve (As Required) A D C E - END ENTRY E A G B .12 (3.0) Ref. COMMON CONNECTOR/SHELL INTERFACE & BACKSHELL DIMENSIONS Com’l Shell Shell Size Ref Size E/09 1 A/15 2 B/25 3 C/37 4 D/50 5 F/104 6 A Max 1.393 (35.4) 1.706 (43.3) 2.265 (57.5) 2.900 (73.7) 2.800 (71.1) 2.900 (73.7) B Max .624 (15.8) .624 (15.8) .624 (15.8) .624 (15.8) .750 (19.1) .844 (21.4) D C Ref. .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .422 (10.7) ±.005 .984 1.312 1.852 2.500 2.406 2.500 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) (63.5) .730 1.050 1.594 2.240 2.140 2.240 P (18.5) (26.7) (40.5) (56.9) (54.4) (56.9) R Ref .719 (18.3) .719 (18.3) .938 (23.8) .938 (23.8) .938 (23.8) 1.094 (27.8) CABLE MOUNTING AND BACKSHELL DIMENSIONS Panel Dash No. Thickness n/a CC n/a F0 .031 (.8) R1 .047 (1.2) R2 .062 (1.6) R3 .093 (2.4) R4 .104 (2.6) R5 .125 (3.2) R6 .156 (4.0) R7 .135 (3.4) R8 .188 (4.8) R9 E .174 (4.4) .343 (8.7) .247 (6.3) .231 (5.9) .216 (5.5) .185 (4.7) .174 (4.4) .153 (3.9) .125 (3.2) .140 (3.6) .094 (2.4) Sizes 1 & 2 1.451 (36.9) 1.625 (41.3) 1.525 (38.7) 1.509 (38.3) 1.500 (38.1) 1.470 (37.3) 1.451 (36.9) 1.430 (36.3) 1.400 (35.6) 1.417 (36.0) 1.368 (34.7) F + .031 (0.79) Sizes 3 - 5 1.671 (42.4) 1.844 (46.8) 1.745 (44.3) 1.728 (43.9) 1.720 (43.7) 1.690 (42.9) 1.671 (42.4) 1.650 (41.9) 1.620 (41.1) 1.637 (41.6) 1.590 (40.4) Size 6 1.820 (46.2) 2.000 (50.8) 1.890 (48.0) 1.875 (47.6) 1.860 (47.2) 1.829 (46.5) 1.820 (46.2) 1.798 (45.7) 1.767 (44.9) 1.805 (45.8) 1.740 (44.2) G + .031 (0.79) Sizes 1 & 2 Sizes 3 - 5 1.583 (40.2) 1.831 (46.5) 1.750 (44.5) 2.000 (50.8) 1.656 (42.1) 1.904 (48.4) 1.640 (41.7) 1.888 (48.0) 1.625 (41.3) 1.873 (47.6) 1.594 (40.5) 1.842 (46.8) 1.583 (40.2) 1.831 (46.5) 1.563 (39.7) 1.811 (46.0) 1.531 (38.9) 1.781 (45.2) 1.550 (39.4) 1.798 (45.7) 1.500 (38.1) 1.750 (44.5) 1. Metric dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-15 MIL-C-24308 D-Subminiature