550E005M

550-005 EMI/RFI D-Subminiature Split Backshell Lamp-Thread Type Shield Termination With Shrink Boot Groove 550 T 0 05 M 2 F 0 B 1 F 0 2 Basic Part No. Cable Entry Style T = Top S = Side E = End Basic Part Number Finish Symbol (Page 3) Shell Size (Table I) H Cable Range Shell I.D. Cable Entry Dash No. (Table II) E = Strain Relief, G = Gland Nut 0 = Without EMI Gasket, 1 = With EMI Gasket Jackscrew Type (Page A-4) Receptacle Mounting (Right Page) CC = Cable-to-Cable Mounting F0 = Front Mounting R1-R9 = Rear Mounting 1.060 (26.9) Max 1. Metric dimensions (mm) are indicated in parentheses. 2. DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. 3. Overall shield thickness range: Max to .031 (0.8) MIL-C-24308 D-Subminiature 1.280 (32.5) Max Style E Strain Relief S SIDE ENTRY 1.060 (26.9) Max .573 (14.6) .140/.130 (3.6/3.3) .079 (2.01) J Shell I.D. T TOP ENTRY E END ENTRY EMI Gasket (Optional) Style G Gland Nut Accomodates MS3109-MS3117, M85049/68 Lipped Type Shrink Boots TABLE I: SHELL SIZE & ENTRY STYLE Com’l Entry Style Entry Style Shell Shell T (Ref) E Size Size Ref Shell I.D. Shell I.D. 1 E/09 .250 (6.4) .375 (9.5) 2 A/15 .375 (9.5) .375 (9.5) 3 B/25 .475 (12.1) .475 (12.1) 4 C/37 .475 (12.1) .475 (12.1) 5 D/50 .575 (14.6) .575 (14.6) 6* F/104 1.000 (25.4) n/a * Shell Size 6 Available in Top Entry Only. © 2004 Glenair, Inc. TABLE II: BACKSHELL DIMENSIONS & CABLE ENTRY Dash No. 02 03 04 05 06 07* 08* H J Cable Range Min Max Max Max .968 (24.6) .515 (13.1) .125 (3.2) .250 (6.4) 1.046 (26.6) .640 (16.3) .250 (6.4) .375 (9.5) 1.156 (29.4) .765 (19.4) .312 (7.9) .500 (12.7) 1.218 (30.9) .920 (23.4) .437 (11.1) .625 (15.9) 1.343 (34.1) 1.015 (25.8) .562 (14.3) .750 (19.1) 1.468 (37.3) 1.140 (29.0) .687 (17.4) .875 (22.2) 1.593 (40.5) 1.265 (32.1) .812 (20.6) 1.000 (25.4) Printed in U.S.A. * Available in Shell Size 6 Only CAGE Code 06324 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-18 D-Subminiature Split Backshells Standard Dimensions Termination Type P Jackscrew Types B, D, E, H, K (Page A-4) Jackscrew Types B, D, E, H, K (Page A-4) F R F E Jackscrew Types B, D, H, K and J Only (Page A-4) Termination Type S - SIDE ENTRY E T - TOP ENTRY Shrink Sleeve (As Required) A D C E - END ENTRY E A G B .12 (3.0) Ref. COMMON CONNECTOR/SHELL INTERFACE & BACKSHELL DIMENSIONS Com’l Shell Shell Size Ref Size E/09 1 A/15 2 B/25 3 C/37 4 D/50 5 F/104 6 A Max 1.393 (35.4) 1.706 (43.3) 2.265 (57.5) 2.900 (73.7) 2.800 (71.1) 2.900 (73.7) B Max .624 (15.8) .624 (15.8) .624 (15.8) .624 (15.8) .750 (19.1) .844 (21.4) D C Ref. .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .422 (10.7) ±.005 .984 1.312 1.852 2.500 2.406 2.500 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) (63.5) .730 1.050 1.594 2.240 2.140 2.240 P (18.5) (26.7) (40.5) (56.9) (54.4) (56.9) R Ref .719 (18.3) .719 (18.3) .938 (23.8) .938 (23.8) .938 (23.8) 1.094 (27.8) CABLE MOUNTING AND BACKSHELL DIMENSIONS Panel Dash No. Thickness n/a CC n/a F0 .031 (.8) R1 .047 (1.2) R2 .062 (1.6) R3 .093 (2.4) R4 .104 (2.6) R5 .125 (3.2) R6 .156 (4.0) R7 .135 (3.4) R8 .188 (4.8) R9 E .174 (4.4) .343 (8.7) .247 (6.3) .231 (5.9) .216 (5.5) .185 (4.7) .174 (4.4) .153 (3.9) .125 (3.2) .140 (3.6) .094 (2.4) Sizes 1 & 2 1.451 (36.9) 1.625 (41.3) 1.525 (38.7) 1.509 (38.3) 1.500 (38.1) 1.470 (37.3) 1.451 (36.9) 1.430 (36.3) 1.400 (35.6) 1.417 (36.0) 1.368 (34.7) F + .031 (0.79) Sizes 3 - 5 1.671 (42.4) 1.844 (46.8) 1.745 (44.3) 1.728 (43.9) 1.720 (43.7) 1.690 (42.9) 1.671 (42.4) 1.650 (41.9) 1.620 (41.1) 1.637 (41.6) 1.590 (40.4) Size 6 1.820 (46.2) 2.000 (50.8) 1.890 (48.0) 1.875 (47.6) 1.860 (47.2) 1.829 (46.5) 1.820 (46.2) 1.798 (45.7) 1.767 (44.9) 1.805 (45.8) 1.740 (44.2) G + .031 (0.79) Sizes 1 & 2 Sizes 3 - 5 1.583 (40.2) 1.831 (46.5) 1.750 (44.5) 2.000 (50.8) 1.656 (42.1) 1.904 (48.4) 1.640 (41.7) 1.888 (48.0) 1.625 (41.3) 1.873 (47.6) 1.594 (40.5) 1.842 (46.8) 1.583 (40.2) 1.831 (46.5) 1.563 (39.7) 1.811 (46.0) 1.531 (38.9) 1.781 (45.2) 1.550 (39.4) 1.798 (45.7) 1.500 (38.1) 1.750 (44.5) 1. Metric dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-19 MIL-C-24308 D-Subminiature