550E048M

MIL-C-24308 D-Subminiature 550-048 D-Subminiature Split Tinel-LockTM Banding Backshell 550 T 0 48 M 2 0 4 F 0 B 1 A I T 1 Basic Part No. Cable Entry Style T = Top S = Side E = End Basic Part Number Finish Symbol (Page 3) Shell Size (Table I) Dash No. (Table III) P L Tinel-LockTM Ring (Optional) 1.28 (32.5) Max Shrink Boot Options (Table III - Omit for None) Tinel-LockTM Ring Supplied (Table II - Omit for None) 0 = Without EMI Gasket, 1 = With EMI Gasket Jackscrew Type (Page A-4) Receptacle Mounting (Right Page) CC = Cable-to-Cable Mounting F0 = Front Mounting R1-R9 = Rear Mounting R T TOP ENTRY F J Typ M H Typ .135 (3.4) Typ. E END ENTRY .525 (13.3) Typ. G E Typ. EMI Gasket (Optional) A D B 1.28 (32.5) Max Typ. R C .27 (6.9) Typ. S SIDE ENTRY F TABLE I: SHELL SIZE & ENTRY STYLE Com’l L Dia M Dia Max Entry Shell Style Style Shell Size Dash No. T E Size Ref Shell I.D. Shell I.D. (Table III) 1 E/09 01 .250 (6.4) .375 (9.5) 2 A/15 03 .375 (9.5) .375 (9.5) 3 B/25 04 .475 (12.1) .475 (12.1) 4 C/37 04 .475 (12.1) .475 (12.1) 5 D/50 05 .575 (14.6) .575 (14.6) 6 F/104 1.000 (25.4) 1.000 (25.4) 09 © 2004 Glenair, Inc. TABLE II: BRAID & RING Ring Braid Type Desig. Single Layer 36 AWG AI Single Layer 34 AWG AI Single Layer 32 AWG BI Single Layer 30 AWG BI Double Layer 36 AWG BI Double Layer 34 AWG BI Double Layer 32 AWG CI .070 (1.8) Thermochromic Paint (Note 3) Tinel-LockTM Ring Option (See Table II) CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-42 550-048 D-Subminiature Split Tinel-LockTM Banding Backshell 1. Metric dimensions (mm) are indicated in parentheses. 2. DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. 3. The Tinel-LockTM Ring designator must be specified according to the type of cable braid used. Tinel-LockTM Rings are marked with thermochromic paint which changes color when the correct installation temperature is reached. BI rings are identified with a red spot. CI rings are identified with a blue spot. TABLE III: SHRINK BOOT Tinel-Lock Ring Entry Dash Shrink Boot Shrink Boot Size No. H Dia J Dia Max Option T1* Option T2* 04 01 .250 (6.4) .375 (9.5) 202K121-25-0 202K121-100-0 05 02 .312 (7.9) .437 (11.1) 202K132-25-0 202K132-100-0 06 03 .375 (9.5) .500 (12.7) 202K132-25-0 202K132-100-0 07 04 .438 (11.1) .562 (14.3) 202K142-25-0 202K142-100-0 08 05 .500 (12.7) .625 (15.9) 202K142-25-0 202K142-100-0 10 06 .625 (15.9) .750 (19.1) 202K153-25-0 202K153-100-0 12 07 .750 (19.1) .875 (22.2) 202K153-25-0 202K153-100-0 14 08 .875 (22.2) 1.000 (25.4) 202K163-25-0 202K163-100-0 16 09 1.000 (25.4) 1.125 (28.6) 202K163-25-0 202K163-100-0 * Raychem Shrink Boot and Epoxy/Polyamide Two Part Adhesive Paste (S1125) Supplied with "T1" Option (See Part Number Development) ** Raychem Shrink Boot and Hot-Melt/Polyolyfin Adhesive Supplied with "T2" Option (See Part Number Development) - This is a Halogen Free System TM COMMON BACKSHELL DIMENSIONS Com’l Shell Shell Size Size Ref E/09 1 A/15 2 B/25 3 C/37 4 D/50 5 F/104 6 A Max 1.393 (35.4) 1.706 (43.3) 2.265 (57.5) 2.900 (73.7) 2.800 (71.1) 2.900 (73.7) B Max .624 (15.8) .624 (15.8) .624 (15.8) .624 (15.8) .750 (19.1) .844 (21.4) D C Ref. .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .422 (10.7) ±.005 .984 1.312 1.852 2.500 2.406 2.500 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) (63.5) .730 1.050 1.594 2.240 2.140 2.240 P (18.5) (26.7) (40.5) (56.9) (54.4) (56.9) R Ref .719 (18.3) .719 (18.3) .938 (23.8) .938 (23.8) .938 (23.8) 1.094 (27.8) CABLE MOUNTING DIMENSIONS Dash No. CC F0 R1 R2 R3 R4 R5 R6 R7 R8 R9 Panel Thickness n/a n/a .031 (.8) .047 (1.2) .062 (1.6) .093 (2.4) .104 (2.6) .125 (3.2) .156 (4.0) .135 (3.4) .188 (4.8) E .174 (4.4) .343 (8.7) .247 (6.3) .231 (5.9) .216 (5.5) .185 (4.7) .174 (4.4) .153 (3.9) .125 (3.2) .140 (3.6) .094 (2.4) Sizes 1 & 2 1.451 (36.9) 1.625 (41.3) 1.525 (38.7) 1.509 (38.3) 1.500 (38.1) 1.470 (37.3) 1.451 (36.9) 1.430 (36.3) 1.400 (35.6) 1.417 (36.0) 1.368 (34.7) F + .031 (0.79) Sizes 3 - 5 1.671 (42.4) 1.844 (46.8) 1.745 (44.3) 1.728 (43.9) 1.720 (43.7) 1.690 (42.9) 1.671 (42.4) 1.650 (41.9) 1.620 (41.1) 1.637 (41.6) 1.590 (40.4) Size 6 1.820 (50.8) 2.000 (50.8) 1.890 (48.0) 1.875 (47.6) 1.860 (47.2) 1.829 (46.5) 1.820 (46.2) 1.798 (45.7) 1.767 (44.9) 1.805 (45.8) 1.740 (44.2) G + .031 (0.79) Sizes 1 & 2 Sizes 3 - 5 1.583 (40.2) 1.831 (46.5) 1.750 (44.5) 1.831 (46.5) 1.656 (42.1) 2.000 (50.8) 1.640 (41.7) 1.904 (48.4) 1.625 (41.3) 1.888 (48.0) 1.594 (40.5) 1.873 (47.6) 1.583 (40.2) 1.842 (46.8) 1.563 (39.7) 1.831 (46.5) 1.531 (38.9) 1.811 (46.0) 1.550 (39.4) 1.781 (45.2) 1.500 (38.1) 1.798 (45.7) Printed in U.S.A. © 2004 Glenair, Inc. CAGE Code 06324 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-43 MIL-C-24308 D-Subminiature