550S009M

550-009 EMI/RFI D-Subminiature Rear Panel Mounted Split Backshell Strain Relief - for Overall Shielding MIL-C-24308 D-Subminiature 550 T 0 09 M 2 R 5 L 1 Basic Part No. Cable Entry Style T = Top S = Side E = End Basic Part Number Shell Size (Tables I and II) Finish Symbol (Page 3) 0 = Without EMI Gasket 1 = With EMI Gasket L = Strain Relief, G = Gland Nut Rear Mounting Connector Panel Thickness (Table III) F Max Typ Cable Range 1.55 (39.4) Max Style L Strain Relief T TOP ENTRY E 1.940 (49.3) Max S SIDE ENTRY E S SIDE ENTRY #4-40 UNC-2B Female Jackscrew Typ. (2 Places) .810 (20.6) Max E END ENTRY .035 (.9) Typ. H Typ. RFI/EMI Gasket Optional B C Style G Gland Nut D A E END ENTRY G © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-26 550-009 EMI/RFI D-Subminiature Rear Panel Mounted Split Backshell Strain Relief - for Overall Shielding TABLE I: CONNECTOR/SHELL INTERFACE & BACKSHELL DIMENSIONS Com’l A B Shell Shell Size Max Max Ref Size 1.393 (35.4) .624 (15.8) E/09 1 1.706 (43.3) .624 (15.8) A/15 2 2.265 (57.5) .624 (15.8) B/25 3 2.900 (73.7) .624 (15.8) C/37 4 2.800 (71.1) .750 (19.1) D/50 5 F/104 2.900 (73.7) .844 (21.4) 6* * Shell Size 6 Available in Top Entry Only. D C Ref. .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .422 (10.7) ±.005 .984 1.312 1.852 2.500 2.406 2.500 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) (63.5) TABLE II: BACKSHELL DIMENSIONS & CABLE ENTRY Com’l Shell Shell Size Size Ref 1 E/09 2 A/15 3 B/25 4 C/37 5 D/50 6 F/104 E (33.5) (33.5) (39.1) (39.1) (39.1) (47.5) F + .031 (0.79) H Max G + .031 (0.79) .843 (21.4) 1.046 (26.6) 1.46 (37.1) .843 (21.4) 1.046 (26.6) 1.46 (37.1) .969 (24.6) 1.156 (29.4) 1.71 (43.4) .969 (24.6) 1.156 (29.4) 1.71 (43.4) 1.218 (30.9) 1.71 (43.4) 1.109 (28.2) 1.468 (37.3) 1.594 (40.5) n/a Cable Range Min Max .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .312 (7.9) .475 (12.1) .312 (7.9) .475 (12.1) .437 (11.1) .575 (14.6) .812 (20.6) 1.000 (25.4) 1.32 1.32 1.54 1.54 1.54 1.87 TABLE III: MOUNTING PANEL THICKNESS Dash No. R1 R2 R3 R4 R5 R6 R7 R8 R9 Panel Thickness .031 (.8) .047 (1.2) .062 (1.6) .093 (2.4) .104 (2.6) .125 (3.2) .156 (4.0) .135 (3.4) .188 (4.8) 1. 2. 3. 4. Metric dimensions (mm) are indicated in parentheses. DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. Overall shield. Thickness range: Max to .062 (1.6). This backshell is designed for rear mounted connectors. Consult factory for additional panel thickness. 5. See page A-5 for mounting diagram. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-29 MIL-C-24308 D-Subminiature