550T007M

MIL-C-24308 D-Subminiature 550-007 EMI/RFI D-Subminiature Split Backshell with Pre-Terminated Overall Shield Sock 550 T 0 07 M 2 F 0 B 1 - 02- 24 Basic Part No. Cable Entry Style T = Top S = Side E = End Basic Part Number Finish Symbol (Page 3) Shell Size (Table I) H Cable Range Shell I.D. Shield Sock Length (In Inches) 6 inch Minimum Order Length Cable Entry Dash No. (Table II) 0 = Without EMI Gasket, 1 = With EMI Gasket Jackscrew Type (Page A-4) Receptacle Mounting (Right Page) CC = Cable-to-Cable Mounting F0 = Front Mounting R1-R9 = Rear Mounting 1.300 (33.3) Max Length Shield Sock: Single Layer Tinned Copper Braid S SIDE ENTRY 1.300 (33.3) Max 1.300 (33.3) Max T TOP ENTRY Shell I.D. E END ENTRY EMI Gasket (Optional) TABLE I: SHELL SIZE & ENTRY STYLE Com’l Shell Shell Size Size Ref 1 E/09 2 A/15 3 B/25 4 C/37 5 D/50 6* F/104 Entry Style Entry Style T (Ref) E Shell I.D. Shell I.D. .250 (6.4) .375 (9.5) .375 (9.5) .375 (9.5) .475 (12.1) .475 (12.1) .475 (12.1) .475 (12.1) .575 (14.6) .575 (14.6) 1.000 (25.4) n/a * Shell Size 6 Available in Top Entry Only. H Ref .940 (23.9) .940 (23.9) 1.060 (26.9) 1.060 (26.9) 1.195 (30.4) 1.594 (40.5) TABLE II: CABLE ENTRY Dash No. 02 03 04 05 06 07 08 09 10 Cable Entry .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .812 (20.6) .875 (22.2) .938 (23.8) 1.000 (25.4) 1. Metric dimensions (mm) are indicated in parentheses. 2. DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. 3. Overall Shield Sock Material: Tinned Copper Braid per QQB-575. Printed in U.S.A. © 2004 Glenair, Inc. CAGE Code 06324 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-22 D-Subminiature Split Backshells Standard Dimensions Termination Type P Jackscrew Types B, D, E, H, K (Page A-4) Jackscrew Types B, D, E, H, K (Page A-4) F R F E Jackscrew Types B, D, H, K and J Only (Page A-4) Termination Type S - SIDE ENTRY E T - TOP ENTRY Shrink Sleeve (As Required) A D C E - END ENTRY B E A G .12 (3.0) Ref. COMMON CONNECTOR/SHELL INTERFACE & BACKSHELL DIMENSIONS Com’l Shell Shell Size Ref Size E/09 1 A/15 2 B/25 3 C/37 4 D/50 5 F/104 6 A Max 1.393 (35.4) 1.706 (43.3) 2.265 (57.5) 2.900 (73.7) 2.800 (71.1) 2.900 (73.7) B Max .624 (15.8) .624 (15.8) .624 (15.8) .624 (15.8) .750 (19.1) .844 (21.4) D C Ref. .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .422 (10.7) ±.005 .984 1.312 1.852 2.500 2.406 2.500 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) (63.5) .730 1.050 1.594 2.240 2.140 2.240 P (18.5) (26.7) (40.5) (56.9) (54.4) (56.9) R Ref .719 (18.3) .719 (18.3) .938 (23.8) .938 (23.8) .938 (23.8) 1.094 (27.8) CABLE MOUNTING AND BACKSHELL DIMENSIONS Panel Dash No. Thickness n/a CC n/a F0 .031 (.8) R1 .047 (1.2) R2 .062 (1.6) R3 .093 (2.4) R4 .104 (2.6) R5 .125 (3.2) R6 .156 (4.0) R7 .135 (3.4) R8 .188 (4.8) R9 E .174 (4.4) .343 (8.7) .247 (6.3) .231 (5.9) .216 (5.5) .185 (4.7) .174 (4.4) .153 (3.9) .125 (3.2) .140 (3.6) .094 (2.4) Sizes 1 & 2 1.451 (36.9) 1.625 (41.3) 1.525 (38.7) 1.509 (38.3) 1.500 (38.1) 1.470 (37.3) 1.451 (36.9) 1.430 (36.3) 1.400 (35.6) 1.417 (36.0) 1.368 (34.7) F Sizes 3 - 5 1.671 (42.4) 1.844 (46.8) 1.745 (44.3) 1.728 (43.9) 1.720 (43.7) 1.690 (42.9) 1.671 (42.4) 1.650 (41.9) 1.620 (41.1) 1.637 (41.6) 1.590 (40.4) G Size 6 1.820 (46.2) 2.000 (50.8) 1.890 (48.0) 1.875 (47.6) 1.860 (47.2) 1.829 (46.5) 1.820 (46.2) 1.798 (45.7) 1.767 (44.9) 1.805 (45.8) 1.740 (44.2) Sizes 1 & 2 1.583 (40.2) 1.750 (44.5) 1.656 (42.1) 1.640 (41.7) 1.625 (41.3) 1.594 (40.5) 1.583 (40.2) 1.563 (39.7) 1.531 (38.9) 1.550 (39.4) 1.500 (38.1) Sizes 3 - 5 1.831 (46.5) 2.000 (50.8) 1.904 (48.4) 1.888 (48.0) 1.873 (47.6) 1.842 (46.8) 1.831 (46.5) 1.811 (46.0) 1.781 (45.2) 1.798 (45.7) 1.750 (44.5) 1. Metric dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-23 MIL-C-24308 D-Subminiature