550T010M

MIL-C-24308 D-Subminiature 550-010 D-Subminiature G-Spring Split Backshell 550 T 0 10 M 2 R 1 B 1 F 0 2- 04 Basic Part No. Cable Entry Style T = Top Basic Part Number Finish Symbol (Page 3) Shell Size (Table I) Receptacle Mounting R1-R9 = Rear Mounting (Table III) Omit for Front Mounting Inner Support Ring Dash No. (Table IV), N = No Support Ring Cable Entry Dash No. (Table II) F = Strain Relief, G = Gland Nut 0 = Without EMI Gasket, 1 = With EMI Gasket Jackscrew Type (Page A-4) H Cable Range Shell I.D. G Style F Strain Relief .270 (6.9) Max 1.44 (36.6) Max Style G Gland Nut GSpring TABLE IV: INNER SUPPORT RING Dash O.D. I.D. No. (.3) ±.010 (.3) ±.010 01 .227 (5.8) .187 (4.7) 02 .258 (6.6) .218 (5.5) 03 .290 (7.4) .250 (6.4) 04 .321 (8.2) .281 (7.1) 05 .352 (8.9) .312 (7.9) 06 .383 (9.7) .343 (8.7) 07 .415 (10.5) .375 (9.5) 08 .446 (11.3) .406 (10.3) 09 .478 (12.1) .438 (11.1) 10 .508 (12.9) .468 (11.9) 11 .540 (13.7) .500 (12.7) 12 .571 (14.5) .531 (13.5) 13 .602 (15.3) .562 (14.3) 14 .633 (16.1) .593 (15.1) 15 .665 (16.9) .625 (15.9) 16 .696 (17.7) .656 (16.7) 17 .727 (18.5) .687 (17.4) 18 .758 (19.3) .718 (18.2) 19 .750 (19.1) .790 (20.1) 20 .821 (20.9) .781 (19.8) 21 .852 (21.6) .812 (20.6) 22 .883 (22.4) .843 (21.4) 23 .915 (23.2) .875 (22.2) 24 .946 (24.0) .906 (23.0) 25 .977 (24.8) .937 (23.8) Consult Factory For Larger Sizes 1.75 (44.5) Max #4-40 UNC (2 Places) E J RFI/EMI Gasket Optional C B A D © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-28 550-010 D-Subminiature G-Spring Split Backshell TABLE I: SHELL SIZE & CONNECTOR INTERFACE DIMENSIONS Com’l Shell Shell Size Size Ref 1 E/09 2 A/15 3 B/25 4 C/37 5 D/50 6 F/104 A Max 1.393 (35.4) 1.706 (43.3) 2.265 (57.5) 2.900 (73.7) 2.800 (71.1) 2.900 (73.7) B Max .624 (15.8) .624 (15.8) .624 (15.8) .624 (15.8) .750 (19.1) .844 (21.4) D C Ref. .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .422 (10.7) ±.005 .984 1.312 1.852 2.500 2.406 2.500 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) (63.5) E (Front Mtd. Recept. Only) 1.625 (41.3) 1.625 (41.3) 1.844 (46.8) 1.844 (46.8) 1.844 (46.8) 2.000 (50.8) Shell I.D. .250 (6.4) .375 (9.5) .475 (12.1) .475 (12.1) .575 (14.6) 1.000 (25.4) TABLE II: CABLE ENTRY G H Dash Max Max No. .625 (15.9) .843 (21.4) 01 .750 (19.1) .968 (24.6) 02 .875 (22.2) 1.046 (26.6) 03 04 1.000 (25.4) 1.156 (29.4) 05 1.125 (28.6) 1.218 (30.9) 06 1.250 (31.8) 1.343 (34.1) 07* 1.406 (35.7) 1.468 (37.3) 08* 1.531 (38.9) 1.593 (40.5) * Available in Shell Size 6 Only Cable Range Min Max .125 (3.2) .250 (6.4) .156 (4.0) .375 (9.5) .250 (6.4) .438 (11.1) .280 (7.1) .500 (12.7) .375 (9.5) .625 (15.9) .500 (12.7) .750 (19.1) .687 (17.4) .875 (22.2) .812 (20.6) 1.000 (25.4) TABLE III: BACKSHELL DIMENSIONS & PANEL THICKNESS Dash No. R1 R2 R3 R4 R5 R6 R7 R8 R9 Panel Thickness .031 (.8) .047 (1.2) .062 (1.6) .093 (2.4) .104 (2.6) .125 (3.2) .156 (4.0) .135 (3.4) .188 (4.8) J .247 (6.3) .231 (5.9) .216 (5.5) .185 (4.7) .174 (4.4) .153 (3.9) .125 (3.2) .140 (3.6) .094 (2.4) Sizes 1 & 2 1.525 (38.7) 1.509 (38.3) 1.500 (38.1) 1.470 (37.3) 1.451 (36.9) 1.430 (36.3) 1.400 (35.6) 1.417 (36.0) 1.368 (34.7) E Sizes 3 - 5 1.745 (44.3) 1.728 (43.9) 1.720 (43.7) 1.690 (42.9) 1.671 (42.4) 1.650 (41.9) 1.620 (41.1) 1.637 (41.6) 1.590 (40.4) Size 6 1.890 (48.0) 1.875 (47.6) 1.860 (47.2) 1.829 (46.5) 1.820 (46.2) 1.798 (45.7) 1.767 (44.9) 1.805 (45.8) 1.740 (44.2) 1. Metric dimensions (mm) are indicated in parentheses. 2. DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. 3. For front mount, mating connector must be mounted to panel using M24308/26 female screwlocks. For rear mount, use Glenair GK134. 4. For proper termination it is recommended that Glenair 469-001 shield support ring be used on all assemblies. Place ring over wire bundle and under shield, position under G-Spring. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-29 MIL-C-24308 D-Subminiature