550T101M

MIL-C-24308 D-Subminiature 550-101 D-Subminiature Retro-Fit Non-EMI Strain-Relief Split Backshell 550 T 1 01 M 2 F O B Basic Part No. Cable Entry Style T = Top E = End Basic Part Number Shell Size (Table I) Finish Symbol (Page 3) Jackscrew Type (Page A-4) Receptacle Mounting (Right Page) CC = Cable-to-Cable Mounting F0 = Front Mounting R1-R9 = Rear Mounting H Cable Range Wire FeedThrough Slot Slotted Clamp Body 1.210 (30.7) Max Slotted Clamp Body (See Detail) F 1.210 (30.7) Max T TOP ENTRY E END ENTRY TABLE I: SHELL SIZE, CABLE ENTRY AND STYLE Shell Size 1 2 3 4 5 Com’l Shell Size Ref E/09 A/15 B/25 C/37 D/50 F Max 1.190 (30.2) 1.320 (33.5) 1.440 (36.6) 1.440 (36.6) 1.560 (39.6) H Max 1.062 (27.0) 1.062 (27.0) 1.156 (29.4) 1.156 (29.4) 1.335 (33.9) Entry Style T Cable Range Min Max .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .312 (7.9) .475 (12.1) .312 (7.9) .475 (12.1) .437 (11.1) .575 (14.6) Entry Style E Cable Range Min Max .250 (6.4) .375 (9.5) .250 (6.4) .375 (9.5) .312 (7.9) .475 (12.1) .312 (7.9) .475 (12.1) .437 (11.1) .575 (14.6) 1. Metric dimensions (mm) are indicated in parentheses. 2. DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-46 D-Subminiature Split Backshells Standard Dimensions Termination Type P Jackscrew Types B, D, E, H, K (Page A-4) F Jackscrew Types B, D, E, H, K (Page A-4) R F E S - SIDE ENTRY E T - TOP ENTRY Termination Type A D C B Jackscrew Types B, D, H, K and J Only (Page A-4) Shrink Sleeve (As Required) E - END ENTRY G E A .12 (3.0) Ref. COMMON BACKSHELL DIMENSIONS Com’l Shell Shell Size Size Ref 1 E/09 2 A/15 3 B/25 4 C/37 5 D/50 6 F/104 A Max 1.393 (35.4) 1.706 (43.3) 2.265 (57.5) 2.900 (73.7) 2.800 (71.1) 2.900 (73.7) B Max .624 (15.8) .624 (15.8) .624 (15.8) .624 (15.8) .750 (19.1) .844 (21.4) D C Ref. .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .422 (10.7) ±.005 .984 1.312 1.852 2.500 2.406 2.500 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) (63.5) .730 1.050 1.594 2.240 2.140 2.240 P (18.5) (26.7) (40.5) (56.9) (54.4) (56.9) R Ref .719 (18.3) .719 (18.3) .938 (23.8) .938 (23.8) .938 (23.8) 1.094 (27.8) CABLE MOUNTING DIMENSIONS Dash No. CC F0 R1 R2 R3 R4 R5 R6 R7 R8 R9 Panel Thickness n/a n/a .031 (.8) .047 (1.2) .062 (1.6) .093 (2.4) .104 (2.6) .125 (3.2) .156 (4.0) .135 (3.4) .188 (4.8) E .174 (4.4) .343 (8.7) .247 (6.3) .231 (5.9) .216 (5.5) .185 (4.7) .174 (4.4) .153 (3.9) .125 (3.2) .140 (3.6) .094 (2.4) Sizes 1 & 2 1.451 (36.9) 1.625 (41.3) 1.525 (38.7) 1.509 (38.3) 1.500 (38.1) 1.470 (37.3) 1.451 (36.9) 1.430 (36.3) 1.400 (35.6) 1.417 (36.0) 1.368 (34.7) F + .031 (0.79) Sizes 3 - 5 1.671 (42.4) 1.844 (46.8) 1.745 (44.3) 1.728 (43.9) 1.720 (43.7) 1.690 (42.9) 1.671 (42.4) 1.650 (41.9) 1.620 (41.1) 1.637 (41.6) 1.590 (40.4) Size 6 1.820 (46.2) 2.000 (50.8) 1.890 (48.0) 1.875 (47.6) 1.860 (47.2) 1.829 (46.5) 1.820 (46.2) 1.798 (45.7) 1.767 (44.9) 1.805 (45.8) 1.740 (44.2) G + .031 (0.79) Sizes 1 & 2 Sizes 3 - 5 1.583 (40.2) 1.831 (46.5) 1.750 (44.5) 2.000 (50.8) 1.656 (42.1) 1.904 (48.4) 1.640 (41.7) 1.888 (48.0) 1.625 (41.3) 1.873 (47.6) 1.594 (40.5) 1.842 (46.8) 1.583 (40.2) 1.831 (46.5) 1.563 (39.7) 1.811 (46.0) 1.531 (38.9) 1.781 (45.2) 1.550 (39.4) 1.798 (45.7) 1.500 (38.1) 1.750 (44.5) 1. Metric dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-47 MIL-C-24308 D-Subminiature