557E110M

MIL-C-24308 D-Subminiature 557-110 EMI/RFI D-Subminiature Solid Backshell for Individual and Overall Shielding with Strain-Relief 557 T 110 M 2 F 0 2 C Basic Part No. Cable Entry Style T = Top S = Side E = End Basic Part Number Shell Size (Table I) Finish Symbol (Page 3) E End Entry J E Style G Gland Nut T End Entry .25 (6.4) Typ. C S Side Entry Style F Strain Relief C = Supplied With Retainer Clips and Jackscrews, Omit for None Cable Entry Dash No. (Table II) F = Strain Relief G = Gland Nut H Typ. Cable Range Typ. Ferrule I.D. Typ. 1.25 (31.8) Max Typ. .425 (10.8) Connector Shown for Ref. Only (Typ.) A Typ. D Typ. 4-40 UNC-2A “C” OPTION HARDWARE Glenair part number 687-236 F Typ. B Typ. TABLE II: CABLE ENTRY H Dash Max No. .968 (24.6) 02 1.046 (26.6) 03 1.156 (29.4) 04 1.218 (30.9) 05 J Max .781 (19.8) .906 (23.0) 1.031 (26.2) 1.156 (29.4) Cable Range Min Max .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .312 (7.9) .500 (12.7) .375 (9.5) .625 (15.9) Ferrule I.D. .125 (3.2) .250 (6.4) .375 (9.5) .500 (12.7) Tapped for 4-40 UNC-2B (2 places). When C option is ordered, two cleared holes are supplied. Metric dimensions (mm) are indicated in parentheses. Max Dash F No. Table II (10.9) 04 (10.9) 04 (10.9) 04 04 (10.9) 04 (14.2) (16.0) 05 Printed in U.S.A. TABLE I: CONNECTOR/SHELL INTERFACE & BACKSHELL DIMENSIONS Shell Com’l Shell Size Ref Size E/09 1 A/15 2 B/25 3 C/37 4 D/50 5 F/104 6 © 2004 Glenair, Inc. D A 1.25 (31.8) 1.58 (40.1) 2.13 (54.1) 2.77 (70.4) 2.68 (68.1) 2.77 (70.4) .53 .53 .53 .53 .66 .73 B (13.5) (13.5) (13.5) (13.5) (16.8) (18.5) .75 .75 1.00 1.00 1.25 1.25 C (19.1) (19.1) (25.4) (25.4) (31.8) (31.8) ±.005 .984 1.312 1.852 2.500 2.406 2.500 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) (63.5) 1.88 1.88 1.88 1.88 2.13 2.13 E (47.8) (47.8) (47.8) (47.8) (54.1) (54.1) .43 .43 .43 .43 .56 .63 CAGE Code 06324 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-50