557T133M

MIL-C-24308 D-Subminiature 557-133 D-Subminiature G-Spring Solid Backshell 557 T 1 33 M 2 F 0 B 1 F 0 2- 04 Basic Part No. Cable Entry Style T = Top Basic Part Number Finish Symbol (Page 3) Shell Size (Table I) Receptacle Mounting (Table II) F0 = Front Mounting R1-R9 = Rear Mounting H Cable Range Inner Support Ring Dash No. (Table III), N = No Support Ring Cable Entry Dash No. (Table IV) F = Strain Relief, G = Gland Nut, D = Dual “G” Spring With Strain Relief 0 = Without EMI Gasket, 1 = With EMI Gasket Jackscrew Type (Page A-4) .135 (3.4) Max Style F Strain Relief G 1.00 (25.4) Max Style G Gland Nut 1.195 (30.4) ±.031 (.8) G #4-40 UNC (2 Places) Connector Retaining Spring Style D Dual Spring Strain Relief RFI/EMI Gasket Optional A B C D © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-72 557-133 D-Subminiature G-Spring Solid Backshell TABLE I: SHELL SIZE & CONNECTOR INTERFACE DIMENSIONS Shell Size 1 2 3 4 5 6 Com’l Shell Size Ref E/09 A/15 B/25 C/37 D/50 F/104 A 1.241 1.569 2.116 2.757 2.663 2.757 (31.5) (39.9) (53.7) (70.0) (67.6) (70.0) .515 .515 .515 .515 .625 .688 B (13.0) (13.0) (13.0) (13.0) (15.9) (17.5) .258 .258 .258 .258 .313 .344 C (6.6) (6.6) (6.6) (6.6) (8.0) (8.7) ±.005 .984 1.312 1.852 2.500 2.406 2.500 D (.1) (25.0) (33.3) (47.0) (63.5) (61.1) (63.5) TABLE II: RECEPTACLE MOUNTING Dash No. R1 R2 R3 R4 R5 R6 R7 R8 F0 Panel Thickness .031 (.8) .047 (1.2) .062 (1.6) .093 (2.4) .104 (2.6) .125 (3.2) .156 (4.0) .135 (3.4) N/A G .247 .231 .216 .185 .174 .153 .125 .140 .305 (6.3) (5.9) (5.5) (4.7) (4.4) (3.9) (3.2) (3.6) (7.7) TABLE III: SUPPORT RING Dash No. 01 02 03 04 05 06 07 08 09 10 Inner Support I.D. O.D. .187 (4.7) .227 (5.8) .218 (5.5) .258 (6.6) .250 (6.4) .290 (7.4) .281 (7.1) .321 (8.2) .312 (7.9) .352 (8.9) .343 (8.7) .383 (9.7) .375 (9.5) .415 (10.5) .406 (10.3) .446 (11.3) .438 (11.1) .478 (12.1) .468 (11.9) .508 (12.9) TABLE IV: CABLE ENTRY Dash No. 01 02 03 04 G Max .625 (15.9) .750 (19.1) 1.000 (25.4) 1.125 (28.6) H Max .843 (21.4) .968 (24.6) 1.156 (29.4) 1.218 (30.9) Cable Range Min Max .125 (3.2) .250 (6.4) .156 (4.0) .375 (9.5) .280 (7.1) .500 (12.7) .375 (9.5) .625 (15.9) 1. Metric dimensions (mm) are indicated in parentheses. 2. DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. 3. For front mount, mating connector must be mounted to panel using M24308/26 female screwlocks. For rear mount, use Glenair GK134. 4. For proper termination it is recommended that Glenair 469-001 shield support ring be used on all assemblies. Place ring over wire bundle and under shield, position under G-Spring. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-73 MIL-C-24308 D-Subminiature