600-157-08

Wrenches, Pliers & Kits 600-157 Composite-Hex-Coupling Wrench STAINLESS STEEL TOOL FOR USE WITH GLENAIR COMPOSITE BACKSHELLS 600 - 157 - K Product Series Basic Number SEE NOTE 5 Dash Number for Individual Wrench or: K - Kit of dash numbers 08 thru 28, no case KC - “K” kit with case KL - Kit of dash numbers 32 thru 44, no case KLC = “KL” kit with case KIT = Kit of dash numbers 08 thru 44 with case B SET SCREW ADJUSTMENT SEE NOTE 3 A RIVET TABLE I: DASH NUMBER Dash No. A Ref B Hex2 Ref Connector for Shell Size Codes A&F Code H Composite Torque Inch Pounds In-Lbs Min/Max 08 6.70 (170.2) .750 (19.1) 08 09 20/25 10 6.75 (171.5) .875 (22.2) 10 11 20/30 12 6.81 (173.0) 1.000 (25.4) 12 13 25/35 14 6.88 (174.8) 1.125 (28.6) 14 15 25/35 16 6.95 (176.5) 1.250 (31.8) 16 17 30/40 18 7.05 (179.1) 1.375 (34.9) 18 19 30/40 20 7.15 (181.6) 1.500 (38.1) 20 21 35/45 22 7.38 (187.5) 1.625 (41.3) 22 23 35/45 24 7.44 (189.0) 1.750 (44.5) 24 25 35/45 2.00 APPROX v APPLICATION NOTES 1. Use in conjunction with Glenair 600G161 torque wrench and 600-162B or 600-162BV bench mounts (see page 14). 2. Adjust set screw per tool setting procedure GAP134 (available on Glenair.com). Once adjusted must fit Glenair hex composite coupling nuts 3. Dash Number 08, 10, 12 only. Customer is responsible for maintaining adjustment to compensate for wear. 4. Replace tool if excessive wear is observed © 2008 Glenair, Inc. 5. Gap is permissible during tool use for coupling nut assembly 6. If set screw becomes loose causing loss of adjustment reapply suitable thread locking compound 7. Wrenches are made of passivated SST with vinyl grips. 8. Using other manufacturer’s hex wrench pliers or soft jaw coated pliers will result in premature fracturing or damage to the composite product CAGE Code 06324 KC Option Approximate Case Dimensions: 13.5 x 15.5 x 3.875 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 15 Rev. 11/05/18 E-Mail: sales@glenair.com