601-005

Manual Tools and Bands Standard Banding Tool The 601-100 Band-Master ATS® Standard Tool with Counter for Standard Bands Weighs approximately 1.30 lbs., and is designed for .240" width clamping bands in a tension range from 100 to 180 lbs. Calibrate at 150 lbs. ± 5 lbs. for most shield terminations. Tool and band should never be lubricated. The 600-058 QPL Qualified (M81306/1A) Standard Banding Tool without Counter Weighs 1.22 and is designed for .240” width clamping bands in a tension range from 100 to 180 lbs. Calibrate at 150 lbs. ± 5 lbs. for most shield terminations. Tool and band should never be lubricated (not shown). Band-Master ATS® Standard Band Selection Color-coded tool handle: = Standard; Black Length In. mm. 9.0 228.6 14.25 361.95 18.0 457.2 Bands Short Standard Medium Standard Long Standard Part Number Flat Pre-Coiled 601-005 601-006 601-040 601-041 601-049 601-050 Fits Diameter In. mm. 1.0 25.4 1.8 45.7 2.5 63.5 Cable Pull Strength for Band-Master™ ATS Standard Bands Name Material Type Standard 300 SS Band Width In mm 0.240 6.10 Band Thickness In mm .020 .51 Calibration Setting Cable Pull Strength 150 ±5 lbs per AS85049/128 QPL Qualifiied Standard Band Selection Length in. mm. 14.25 361.95 Bands Standard Band Mil Spec Part Number Flat Pre-Coiled M85049/128-3 M85049/128-4 Fits Diameter in. mm. 1.8 45.7 Cable Pull Strength for Standard QPL Qualified Bands Name Material Type Standard 300 SS Band Width In mm 0.240 6.10 Band Thickness In mm .020 .51 Calibration Setting Cable Pull Strength 150 ±5 lbs per AS85049/128 Knife and Blade and Replacement / Upgrade Kit Tool 601-100 Band-Master Standard 600-058 QPL Qualified Tool 2 Replacement Part Number(s) 601-330 Knife and Blade Kit Contact Factory © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 Dimensions in Inch (mm) Standard Bands Short Flat 601-005 Short Precoiled 601-006 Standard Bands are precision constructed of 300 Series SST passivate IAW AMS 2700 . Short Standard Bands are 9.00 inches (228.6) in length and designed for use with the Band-Master ATS® 60-100 manual banding tool or the 601-106 pneumatic banding tool. Bands should always be double wrapped and will accommodate diameters up to approximately 1.0 inches (25.4). Tail Length Indicator Mark .350 (8.9) Ref. .240 (6.1) Ref. 9.0 ± .030 (228.6 ± 0.8) .156 (4.0) Ref. .020 (0.5) Ref. .074 (1.9) Ref. Medium Flat 601-040 Medium Precoiled 601-041 Standard bands are precision constructed of 300 Series SST passivate IAW AMS 2700. Medium Standard Bands are 14.25 inches (361.95) in length and designed for use with the Band-Master ATS® 601-100 manual banding tool or the 601-106 pneumatic banding tool. Bands should always be double wrapped and will accommodate diameters up to approximately 1.8 inches (45.7). Tail Length Indicator Mark .350 (8.9) Ref. .240 (6.1) Ref. 14.25 ± .060 (361.95 ± 1.5) .156 (4.0) Ref. .020 (0.5) Ref. .074 (1.9) Ref. Long Flat 601-049 Long Precoiled 601-050 Standard bands are precision constructed of 300 Series SST passivate IAW AMS 2700. Long Standard Bands are 18.0 inches (457.2) in length and designed for use with the Band-Master ATS® 601-100 manual banding tool or the 601-106 pneumatic banding tool. Bands should always be double wrapped and will accommodate diameters up to approximately 2.5 inches (63.5). 3 Tail Length Indicator Mark .350 (8.9) Ref. .240 (6.1) Ref. 18.0 ± .060 (457.2 ± 1.5) .156 (4.0) Ref. .074 (1.9) Ref. © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 .020 (0.5) Ref. Dimensions in Inch (mm)