601-025

Manual Tools and Bands Micro Banding Tool The 601-101 Band-Master ATS® Micro Tool with Counter for Micro Bands Weighs approximately 1.20 lbs., and is designed for Micro .120" width clamping bands in a tension range from 50 to 85 lbs. Calibrate at 80 lbs ±3 lbs. for most shield terminations. Tool and band should never be lubricated. The 600-061 QPL Qualified (M81306/1B) Micro Banding Tool without Counter Weighs 1.11 and is designed for Micro .120” width clamping bands in a tension range from 60 to 85 lbs. Calibrate at 80 lbs ±5 lbs. Tool and band should never be lubricated. Band-Master ATS® Micro Band Selection Color-coded tool handle: = Micro; Blue Length in. mm. 5.0 127.0 8.125 206.38 14.25 361.95 Bands Short Micro Medium Micro Long Micro Flat 601-024 601-060 601-064 Part Number Pre-Coiled 601-025 601-061 601-065 Fits Diameter in. mm. 0.5 12.7 .88 22.4 1.8 45.7 Cable Pull Strength for Band-Master ATS® Micro Bands Name Material Type Micro 300 SS Band Width In mm 0.120 3.05 Band Thickness In mm .015 .38 Calibration Setting Cable Pull Strength 80 ±5 lbs per AS85049/128 QPL Qualified Micro Band Selection Length in. mm. 8.125 206.38 Bands Standard Micro Part Number Flat Pre-Coiled M85049/128-7 M85049/128-8 Fits Diameter in. mm. .88 22.4 Cable Pull Strength for Micro QPL Qualified Bands Name Material Type Micro 300 SS Band Width In mm 0.120 3.05 Band Thickness In mm .015 .38 Calibration Setting Cable Pull Strength 80 ±5 lbs per AS85049/128 Knife and Blade and Replacement / Upgrade Kit Tool 601-101 Band-Master Micro 600-061 QPL Qualified 6 Replacement Part Number(s) 601-329 Knife and Blade Kit Contact Factory © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 Dimensions in Inch (mm) Micro Bands Short Flat 601-024 Short Precoiled 601-025 Micro Bands are precision constructed of 300 Series SST passivate IAW AMS 2700. Short Micro Bands are 5.00 inches (127) in length and designed for use with the Band-Master™ 601-101 hand banding tool or the 601-107 pneumatic banding tool. Bands should always be double wrapped and will accommodate diameters up to approximately .5 inches (12.7). Tail Length Indicator Mark .195 (5.0) Ref. .120 (3.0) Ref. 5.0 ± .030 (127 ± 0.8) .090 (2.3) Ref. .015 (0.4) Ref. .053 (1.9) Ref. Medium Flat 601-060 Medium Precoiled 601-061 Micro Bands are precision constructed of 300 Series SST passivate IAW AMS 2700. Medium Micro Bands are 8.00 inches (203.2) in length and designed for use with the Band-Master™ 601-101 hand banding tool or the 601-107 pneumatic banding tool. Bands should always be double wrapped and will accommodate diameters up to approximately .88 inches (22.4). Tail Length Indicator Mark .195 (5.0) Ref. .120 (3.0) Ref. 8.125 ± .030 (206.4 ± 0.8) .090 (2.3) Ref. .015 (0.4) Ref. .053 (1.9) Ref. Long Flat 601-064 Long Precoiled 601-065 Micro Bands are precision constructed of 300 Series SST passivate IAW AMS 2700. Long Micro Bands are 14.00 inches (355.6) in length and designed for use with the Band-Master™ 601-101 hand banding tool or the 601-107 pneumatic banding tool. Bands should always be double wrapped and will accommodate diameters up to approximately 1.88 inches (47.8). 7 Tail Length Indicator Mark .195 (5.0) Ref. .120 (3.0) Ref. 14.25 ± .030 (362.0 ± 0.8) .090 (2.3) Ref. .053 (1.9) Ref. © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 .015 (0.4) Ref. Dimensions in Inch (mm)