Manual Tools and Bands
Standard Banding Tool
The 601-100 Band-Master ATS® Standard Tool with Counter for
Standard Bands
Weighs approximately 1.30 lbs., and is designed for .240" width clamping bands
in a tension range from 100 to 180 lbs. Calibrate at 150 lbs. ± 5 lbs. for most shield
terminations. Tool and band should never be lubricated.
The 600-058 QPL Qualified (M81306/1A) Standard
Banding Tool without Counter
Weighs 1.22 and is designed for .240” width clamping bands in a tension range from 100
to 180 lbs. Calibrate at 150 lbs. ± 5 lbs. for most shield terminations. Tool and band should
never be lubricated (not shown).
Band-Master ATS® Standard Band Selection
Color-coded tool handle:
= Standard; Black
Length
In.
mm.
9.0
228.6
14.25
361.95
18.0
457.2
Bands
Short Standard
Medium Standard
Long Standard
Part Number
Flat
Pre-Coiled
601-005
601-006
601-040
601-041
601-049
601-050
Fits Diameter
In.
mm.
1.0
25.4
1.8
45.7
2.5
63.5
Cable Pull Strength for Band-Master™ ATS Standard Bands
Name
Material Type
Standard
300 SS
Band Width
In
mm
0.240
6.10
Band Thickness
In
mm
.020
.51
Calibration
Setting
Cable Pull Strength
150 ±5 lbs
per AS85049/128
QPL Qualifiied Standard Band Selection
Length
in.
mm.
14.25 361.95
Bands
Standard Band
Mil Spec Part Number
Flat
Pre-Coiled
M85049/128-3
M85049/128-4
Fits Diameter
in.
mm.
1.8
45.7
Cable Pull Strength for Standard QPL Qualified Bands
Name
Material Type
Standard
300 SS
Band Width
In
mm
0.240
6.10
Band Thickness
In
mm
.020
.51
Calibration
Setting
Cable Pull Strength
150 ±5 lbs
per AS85049/128
Knife and Blade and Replacement / Upgrade Kit
Tool
601-100 Band-Master Standard
600-058 QPL Qualified Tool
2
Replacement Part Number(s)
601-330 Knife and Blade Kit
Contact Factory
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Dimensions in Inch (mm)
Standard Bands
Short Flat 601-005
Short Precoiled 601-006
Standard Bands are precision constructed of 300
Series SST passivate IAW AMS 2700 . Short Standard
Bands are 9.00 inches (228.6) in length and designed
for use with the Band-Master ATS® 60-100 manual
banding tool or the 601-106 pneumatic banding
tool. Bands should always be double wrapped and
will accommodate diameters up to approximately
1.0 inches (25.4).
Tail Length Indicator Mark
.350 (8.9) Ref.
.240 (6.1) Ref.
9.0 ± .030
(228.6 ± 0.8)
.156 (4.0) Ref.
.020 (0.5) Ref.
.074 (1.9) Ref.
Medium Flat 601-040
Medium Precoiled 601-041
Standard bands are precision constructed of 300
Series SST passivate IAW AMS 2700. Medium Standard
Bands are 14.25 inches (361.95) in length and designed
for use with the Band-Master ATS® 601-100 manual
banding tool or the 601-106 pneumatic banding
tool. Bands should always be double wrapped and
will accommodate diameters up to approximately 1.8
inches (45.7).
Tail Length Indicator Mark
.350 (8.9) Ref.
.240 (6.1) Ref.
14.25 ± .060
(361.95 ± 1.5)
.156 (4.0) Ref.
.020 (0.5) Ref.
.074 (1.9) Ref.
Long Flat 601-049
Long Precoiled 601-050
Standard bands are precision constructed of 300
Series SST passivate IAW AMS 2700. Long Standard
Bands are 18.0 inches (457.2) in length and designed
for use with the Band-Master ATS® 601-100 manual
banding tool or the 601-106 pneumatic banding
tool. Bands should always be double wrapped and
will accommodate diameters up to approximately
2.5 inches (63.5).
3
Tail Length Indicator Mark
.350 (8.9) Ref.
.240 (6.1) Ref.
18.0 ± .060
(457.2 ± 1.5)
.156 (4.0) Ref.
.074 (1.9) Ref.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
.020 (0.5) Ref.
Dimensions in Inch (mm)
很抱歉,暂时无法提供与“601-050”相匹配的价格&库存,您可以联系我们找货
免费人工找货