601-571

Manual Tools and Bands Slim Standard Banding Tool Choose Glenair Slim Standard Bands for size and weight savings. Slim bands are 50% lighter with 50% lower profile than our standard bands, while maintaining similar performance. The 601-109 Band-Master ATS® Slim Standard Tool with Counter for Slim Standard Bands For use with slim standard flat and pre-coiled quarter inch wide clamping bands. Tension range is approximately 30 to 80 lbs. Calibrate at 100 lbs. ± 3 lbs of linear pull. Tool weighs 1.2 Lb. Tool and band should never be lubricated. Band-Master ATS® Slim Standard Band Selection Color-coded tool handle = Slim Standard; Orange Bands Short Slim Standard Medium Slim Standard Length in. mm. 9.0 228.6 14.25 361.95 Flat 601-570 601-572 Part Number Pre-Coiled 601-571 601-573 Fits Diameter in. mm. .94 23.9 1.8 45.7 Cable Pull Strength for Band-Master ATS® Slim Standard Bands Name Slim Standard Material Type 300 Series SST Band Width In mm 0.240 6.09 Band Thickness In mm .010 .25 Tool Setting Cable Pull Strength 100 lbs. ± 3 lbs. 150 lbs.* * Slim Bands are work hardened to achieve higher cable pull force Knife and Blade and Replacement / Upgrade Kit Tool 601-109 Band-Master Slim Standard 4 Replacement Part Number(s) 601-331 Knife and Blade Kit © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 Dimensions in Inch (mm) Slim Standard Bands Slim bands are better at conforming to irregular platform shapes (elliptical platforms) and individual braid buildup (pig tails) Short Flat 601-570 Short Precoiled 601-571 Slim Standard Bands are 50% lighter and 50% lowerprofile than Standard Bands. They are precision constructed of work hardened, 300 Series SST passivate IAW AMS 2700. Short Slim Bands are 9.00 inches (228.6) in length and designed for use with the 601-109 Band-Master ATS® hand banding tool or the 601-110 pneumatic tool. Bands should always be double wrapped and will accommodate diameters up to approximately .94 inches (23.9). Tail Length Indicator Mark .370 (9.4) Ref. 9.0 ± .030 (228.6 ± 0.8) .156 (4.0) Ref. 5 .010 (0.3) Ref. .030 (0.7) Ref. Medium Flat 601-572 Medium Precoiled 601-573 Slim Standard Bands are 50% lighter and 50% lower-profile than Standard Bands. They are precision constructed of work hardened, 300 Series SST passivate IAW AMS 2700. Medium Slim Bands are 14.25 inches (228.6) in length and designed for use with the 601-109 Band-Master ATS® hand banding tool or the 601-110 pneumatic tool. Bands should always be double wrapped and will accommodate diameters up to approximately 1.8 inches (45.7) .240 (6.1) Ref. Tail Length Indicator Mark .370 (9.4) Ref. .240 (6.1) Ref. 14.25 ± .030 (362.0 ± 0.8) .156 (4.0) Ref. .030 (0.7) Ref. © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 .010 (0.3) Ref. Dimensions in Inch (mm)