601-601

Manual Tools and Bands Micro Slim Banding Tool The 601-122 Band-Master ATS® Micro Slim Tool with Counter for use with Micro Slim Bands Weighs approximately 1.20 lbs., and is designed for Micro Slim .120 (3.05) width clamping bands in a tension range from 60 to 90 lbs. Double wrapped bands will accommodate up to .88 (22.35) inch diameter. Calibrate at 82 lbs ±3 lbs. for most shield terminations. Tool and band should never be lubricated. Color-coded tool handle: = Micro Slim; Yellow Band-Master ATS® Micro Slim Band Selection Bands Medium Micro Slim Long Micro Slim Length in. mm. 8.125 206.38 14.25 361.95 Flat 601-600 601-602 Part Number Pre-Coiled 601-601 601-603 Fits Diameter in. mm. .88 22.4 1.80 45.7 Cable Pull Strength for Band-Master ATS® Micro Slim Bands Name Material Type Micro Slim 300 SST Work Hardened/Passivate Band Width In mm 0.12w 3.05 Band Thickness In mm .010 0.25 Calibration Setting Cable Pull Strength 82 ±3 lbs 80 lvbs Knife and Blade and Replacement / Upgrade Kit Tool 601-122 Band-Master Micro Slim 8 Replacement Part Number(s) 601-328 Knife and Blade Kit © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 Dimensions in Inch (mm) Micro Slim Bands Slim bands are better at conforming to irregular platform shapes (elliptical platforms) and individual braid buildup (pig tails) Medium Flat 601-600 Medium Precoiled 601-601 Micro Slim bands are precision constructed of 300 Series SST passivate IAW AMS 2700. Medium Micro Slim bands are 8.00 inches (203.2) in length and designed for use with the Band-Master™ 601-122 hand banding tool or the 601-123 pneumatic banding tool. Bands should always be double wrapped and will accommodate diameters up to approximately .88 inches (22.4). Tail Length Indicator Mark .195 (5.0) Ref. .120 (3.0) Ref. 8.125 ± .030 (206.4 ± 0.8) .094 (2.4) Ref. .010 (0.25) Ref. .040 (1.02) Ref. Long Flat 601-602 Long Precoiled 601-603 Micro Slim bands are precision constructed of 300 Series SST passivate IAW AMS 2700. Long Micro Slim Bands are 14.00 inches (355.6) in length and designed for use with the Band-Master™ 601-122 hand banding tool or the 601-123 pneumatic banding tool. Bands should always be double wrapped and will accommodate diameters up to approximately 1.88 inches (45.7). 9 Tail Length Indicator Mark .195 (5.0) Ref. .120 (3.0) Ref. 14.25 ± .030 (362.0 ± 0.8) .090 (2.3) Ref. .040 (1.9) Ref. © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 .010 (0.25) Ref. Dimensions in Inch (mm)