627H122XO16

Composite Backshells CONNECTOR DESIGNATOR: 627-122 Composite Swing-Arm Strain Relief with Self-Locking Rotatable Coupling A A F H MIL-DTL-5015, -26482 Series II, and -83723 Series I and III MIL-DTL-38999 Series I, II MIL-DTL-38999 Series III and IV Product Series 627 - Swing-Arm Strain Relief Basic Part Number Dash Number (See Table II) 627 A 122 XO 16 Finish Symbol (See Table III) SELF-LOCKING B ROTATABLE COUPLING LOW PROFILE Connector Designator A, F and H Self-Locking Coupling J G Captivated Self-Locking Telescoping Screws (Typ) E (Typ) Closed C D F (Typ) D Straight Position .062 (1.6) Min .250 (6.4) max Screw Protrusion (Typ) E 90° Position Shown 45° Position Shown Captive Position Screw locks Swing Arm in 45° increments (Notes 2, 3) (Note 2) Position Indicators F Screw Head Same Side (Typ) U.S. PATENT NO. 6419519 G © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-98 627-122 Composite Swing-Arm Strain Relief with Self-Locking Rotatable Coupling TABLE II: CONNECTOR SHELL SIZE ORDER NUMBER Shell Size for Connector Designator* AFH 08 08 09 10 10 11 12 12 13 14 14 15 16 16 17 18 18 19 20 20 21 22 22 23 24 24 25 E ±.06 (1.5) .265 (6.7) .310 (7.9) .390 (9.9) .506 (12.9) .591 (15.0) .661 (16.8) .744 (18.9) .826 (21.0) .896 (22.8) F Min .220 (5.9) .270 (6.9) .350 (8.9) .470 (11.9) .550 (14.0) .620 (15.7) .700 (17.8) .780 (19.8) .850 (21.6) G Max 1.060 (26.9) 1.090 (27.7) 1.180 (30.0) 1.240 (31.5) 1.320 (33.5) 1.390 (35.3) 1.550 (39.4) 1.550 (39.4) 1.610 (40.9) H Max .980 (24.9) 1.050 (26.7) 1.200 (30.5) 1.300 (33.0) 1.440 (36.6) 1.560 (39.6) 1.690 (42.9) 1.770 (45.0) 1.890 (48.0) J ±.03 .880 .910 .950 1.010 1.050 1.080 1.120 1.160 1.200 0.8 (22.4) (23.1) (24.1) (25.7) (26.7) (30.0) (28.4) (29.5) (30.5) TABLE III: FINISH Symbol XB XO Finish Description No Plating - Black Color (Non-Conductive Finish) No Plating - Brown Color (Non-Conductive Finish) APPLICATION NOTES 1. 2. 3. Metric dimensions (mm) are in parentheses and are for reference only. Glenair series 600 Backshell assembly Tools are recommended for assembly and installation. Swing Arm locks in 45° increments– Sizes 08 thru 24, additional positioning increments are manufacturer's option. 4. Captive Screw can remain engaged to the body when positioning the Arm. When tightened, the Screw shall not protrude into the inside surfaces. Coupling nut supplied unplated. Consult factory for additional entry sizes available. See Table I in Intro for front-end dimensional details. 5. 6. 7. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-99 Composite Backshells A B C D E F G