630B005NF

630-005 EMI/RFI Environmental G-Spring Bulkhead Fitting with Strain Relief Front and Rear Panel Mount - Straight 630 A 005 NF 16 2 G 63 "G"-Spring EMI/RFI Shield Termination C Mounting Hole (Typ) F* * F Panel Cutout For Rear Mount B Sq. G Panel Cutout For Front Mount B Sq. A Sq. © 2005 Glenair, Inc. Product Series Fitting Type A = Rear Mount B = Front Mount Basic Part No. Finish (Table II) Strain Relief Style (G, F) Fitting Style 1 = RFI/EMI Only 2 = RFI/EMI Environmental Cable Entry (Table III) .125 (3.2) Max Panel .960 (24.4) Max .690 (17.5) Max Panel Ref .820 (20.8) Max .400 (10.2) D Typ E Style 1 RFI/EMI Rear Mount Type A (Shown With Style F Strain Relief) Style 1 RFI/EMI Front Mount Type B (Shown With Style G Gland Nut) .125 (3.2) Max Panel .960 (24.4) 1.220 (31.0) Max Panel Ref .820 (20.8) 1.220 (31.0) Cable Range 469-001-XX Shield Support Ring (order separately) is recommended for use in all G-Spring Bulkhead Fittings (see page 460-3) Style 2 RFI/EMI Environmental Rear Mount Type A (Shown With Style F Strain Relief) CAGE Code 06324 Style 2 RFI/EMI Environmental Front Mount Type B (Shown With Style F Strain Relief) Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 63 - Page 4 with Strain Relief Front and Rear Panel Mount - Straight See inside back cover fold-out or page 14 for Table II. TABLE III: CABLE ENTRY Dash No. 01 02 03 04 05 06 07 08 09 10 11 Cable Range Min Max .156 (4.0) .250 (6.4) .188 (4.8) .375 (9.5) .250 (6.4) .438 (11.1) .280 (7.1) .500 (12.7) .375 (9.5) .625 (15.9) .500 (12.7) .750 (19.1) .625 (15.9) .875 (22.2) .750 (19.1) 1.000 (25.4) .875 (22.2) 1.125 (28.6) 1.000 (25.4) 1.250 (31.8) 1.125 (28.6) 1.375 (34.9) A Max .885 (22.5) 1.104 (28.0) 1.197 (30.4) 1.291 (32.8) 1.385 (35.2) 1.635 (41.5) 1.760 (44.7) 2.010 (51.1) 2.260 (57.4) 2.510 (63.8) 2.760 (70.1) B Dim .593 (15.1) .812 (20.6) .906 (23.0) .968 (24.6) 1.062 (27.0) 1.250 (31.8) 1.375 (34.9) 1.562 (39.7) 1.750 (44.5) 1.938 (49.2) 2.125 (54.0) C +.015 (+0.4) - 0 (-0.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .147 (3.7) .147 (3.7) .173 (4.4) .173 (4.4) .173 (4.4) Dash No. 01 02 03 04 05 06 07 08 09 10 11 D Max .843 (21.4) .968 (24.6) 1.046 (26.6) 1.156 (29.4) 1.218 (30.9) 1.343 (34.1) 1.468 (37.3) 1.593 (40.5) 1.718 (43.6) 1.843 (46.8) 2.187 (55.5) TABLE III (Continued) F E +.015 (+0.4) Max - 0 (-0.0) .625 (15.9) .515 (13.1) .750 (19.1) .640 (16.3) .875 (22.2) .765 (19.4) 1.000 (25.4) .890 (22.6) 1.125 (28.6) 1.015 (25.8) 1.250 (31.8) 1.140 (29.0) 1.375 (34.9) 1.265 (32.1) 1.500 (38.1) 1.390 (35.3) 1.625 (41.3) 1.515 (38.5) 1.750 (44.5) 1.640 (41.7) 1.875 (47.6) 1.765 (44.8) G +.031 (+0.8) - 0 (-0.0) .250 (6.4) .375 (9.5) .438 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1. Metric dimensions (mm) are indicated in parentheses. 2. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 3. For proper termination, it is recommended that Glenair 469-001 Shield Support Ring (page 460-3) must be used on all assemblies. Place ring over wire and under shield; position under G-Spring. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 63 - Page 5 63 630-005 EMI/RFI Environmental G-Spring Bulkhead Fitting