710-652NF40

Adapters and Transitions 710-652 Multi-Port Special Purpose Transitions for Series 72 & 74 Tubing and Series 75 Conduit 710 - 652 NF 40 A4 B4 C4 D4 E4 F4 Product Series Basic Number Finish Symbol (Table III) Dash No. (Table I, Note 2) "A" Port Conduit Dash No. (Table II) "B" Port Conduit Dash No. (Table II) "C" Port Conduit Dash No. (Table II, Omit if Not Used) "E" Port Conduit Dash No. (Table II, Omit if Not Used) "D" Port Conduit Dash No. (Table II, Omit if Not Used) "F" PortConduit Dash No. (Table II, Omit if Not Used) .43 (10.9) Ref. .20 (5.1) Ref. C Thread B F E D Port "D" A Thread Knurl Style Mfr Option 1.24 (31.5) Ref. Port "A" Port "B" .610 (15.5) Max Port "C" 4 PORT Port "A" Port "E" Port "B" Port "A" Port "A" Port "F" Port "A" Port "B" Port "B" Port "C" Port "B" Port Port "C" "D" Port "E" Port "D" Port "C" 2 PORT 3 PORT 5 PORT 6 PORT © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com G-14 710-652 Multi-Port Special Purpose Transitions for Series 72 & 74 Tubing and Series 75 Conduit Dash No. 20 21 22 23 24 26 28 30 31 32 33 34 35 36 37 38 40 42 58 60 A Thread Class 2A 1 1/4 - 18 UNEF 1 5/16 - 18 UNEF 1 3/8 - 18 UNEF 1 7/16 - 18 UNEF 1 1/2 - 18 UNEF 1 5/8 - 18 UNEF 1 3/4 - 18 UNS 1 7/8 - 18 UNS 1 15/16 - 16 UN 2 - 18 UN 2 1/16 - 16 UNS 2 1/8 - 16 UN 2 3/16 - 16 UNS 2 1/4 - 16 UN 2 5/16 - 16 UNS 2 3/8 - 16 UN 2 1/2 - 16 UN 2 5/8 - 16 UN 3 5/8 - 16 UN 3 3/4 - 16 UN TABLE I B Max 1.41 (35.8) 1.47 (37.3) 1.53 (38.9) 1.59 (40.4) 1.66 (42.2) 1.78 (45.2) 1.91 (48.5) 2.03 (51.6) 2.09 (53.1) 2.16 (54.9) 2.22 (56.4) 2.28 (57.9) 2.34 (59.4) 2.41 (61.2) 2.47 (62.7) 2.53 (64.3) 2.66 (67.6) 2.78 (70.6) 3.78 (96.0) 3.91 (99.3) ±.005 E (.1) (24.9) (26.4) (27.9) (29.5) (31.0) (34.3) (37.6) (40.4) (42.2) (43.9) (45.2) (46.7) (48.3) (50.0) (51.6) (53.1) (56.4) (59.4) (84.8) (88.1) ±.005 F (.1) (27.8) (29.4) (31.0) (32.5) (34.2) (37.3) (40.5) (43.7) (45.0) (46.9) (48.3) (49.8) (51.3) (53.0) (54.5) (56.1) (59.3) (62.5) (87.9) (91.2) .980 1.040 1.100 1.160 1.220 1.350 1.480 1.590 1.660 1.730 1.780 1.840 1.900 1.970 2.030 2.090 2.220 2.340 3.340 3.468 1.095 1.157 1.220 1.280 1.345 1.470 1.595 1.720 1.770 1.845 1.900 1.960 2.020 2.085 2.145 2.210 2.335 2.460 3.460 3.590 TABLE II Port Conduit D A Thread Conduit Code Class 2A ±.005 (.1) Dash No. Ref. 7/16 - 28 UNEF .187 (4.7) 1 06 1/2 - 20 UNEF .250 (6.4) 2 08 9/16 - 24 UNEF .281 (7.1) 3 09 9/16 - 24 UNEF .312 (7.9) 4 10 5/8 - 24 UNEF .375 (9.5) 5 12 11/16 - 24 UNEF .437 (11.1) 6 14 3/4 - 20 UNEF .500 (12.7) 7 16 7/8 - 20 UNEF .625 (15.9) 8 20 1 - 20 UNEF .750 (19.1) 9 24 1 3/16 - 18 UNEF .875 (22.2) 10 28 1 5/16 - 18 UNEF 1.000 (25.4) 11 32 1 1/2 - 18 UNEF 1.250 (31.8) 12 40 Notes: 1. Metric dimensions (mm) are in parentheses. SYMBOL FINISH B J M N NC NF T Z1 TABLE III Olive Drab over Cadmium Plate Gold Iridite over Cadmium Plate over Nickel Electroless Nickel Olive Drab over Cadmium Plate over Nickel Zinc-Cobalt, Olive Drab Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) Bright Dip Cadmium Plate over Nickel Passivate 2. Plate diameter "B" is based on outlet combinations, utilizing Type "T" Designator (page 00 and 00) fittings. Consult factory for available combinations. © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com G-15 Adapters and Transitions