710FS002M

Non-Environmental Straight, 45° & 90° User-Installable Connector Fittings for Series 72 Annular Convoluted Tubing 710-002 Series 72 Convoluted Tubing TYPE A 710 A A 002 M 16 20 Product Series Connector Designator (A, D, F, H, or L) (Pages F-4 to F-6) Angle: A = 90° B = 45° S = Straight Dash No. (Table II) Shell Size (Table I) Finish (Table III) Basic No. E (REF) A THREAD (Page F-17) C DIA (Page F-17) E TUBING I.D. (Ref) (See Table II) STYLE 2 (STRAIGHT) .875 (22.2) MAX STRAIGHT H F 45° J STYLE 2 (90° & 45°) G 90° 45° L TYP. DIA Metric dimensions (mm) are indicated in parentheses. Tubing shown for reference only. © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com E-10 Non-Environmental Straight, 45° & 90° User-Installable Connector Fittings for Series 72 Annular Convoluted Tubing 710-002 SHELL SIZE A,D,F,L 08 10 12 14 16 18 20 22 24 28 32 36 H 09 11 13 15 17 19 21 23 25 ---- E MAX 1.120 (28.4) 1.141 (29.0) 1.180 (30.0) 1.202 (30.5) 1.230 (31.2) 1.260 (32.0) 1.300 (33.0) 1.335 (33.9) 1.360 (34.5) 1.435 (36.4) 1.505 (38.2) 1.570 (39.9) TABLE I F MAX .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) G MAX 1.605 (40.8) 1.725 (43.8) 1.745 (44.3) 1.815 (46.1) 1.905 (48.4) 2.075 (52.7) 2.075 (52.7) 2.185 (55.5) 2.185 (55.5) 2.355 (59.8) 2.575 (65.4) 2.605 (66.2) H MAX .520 (13.2) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .927 (23.5) .927 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) J MAX 1.655 (42.0) 1.655 (42.0) 1.715 (43.6) 1.805 (45.8) 1.915 (48.6) 2.105 (53.5) 2.105 (53.5) 2.255 (57.3) 2.255 (57.3) 2.305 (58.5) 2.405 (61.1) 2.495 (63.4) DASH NO. 09 12 16 20 24 28 32 40 TABLE II TUBING I.D. (REF) MIN MAX .240 (6.1) .280 (7.1) .330 (8.4) .370 (9.4) .450 (11.4) .500 (12.7) .570 (14.5) .620 (15.7) .690 (17.5) .750 (19.1) .810 (20.6) .870 (22.1) .930 (23.6) 1.000 (25.4) 1.180 (30.0) 1.250 (31.8) L DIA .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.438 (36.5) 1.625 (41.3) 1.750 (44.5) 2.000 (50.8) TABLE III SYMBOL FINISH B J M N NC NF T Olive Drab over Cadmium Plate Gold Iridite over Cadmium Plate over Nickel Electroless Nickel Olive Drab over Cadmium Plate over Nickel Zinc-Cobalt, Olive Drab Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) Bright Dip Cadmium Plate over Nickel CAGE Codes 06324 Printed in U.S.A. When tubing I.D. MAX exceeds inside diameter of connector shell, style 2 will be supplied. Refer to pages F-15 and F-16. © 2003 Glenair, Inc. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com E-11 Series 72 Convoluted Tubing