712475XM20NE

712-475 Composite Conduit Bulkhead Feed-Through Adapter for Environmental or Non-Environmental Series 74 PEEK or Standard Tubing 712 475 XM 20 D E K Product Series Basic Number Finish (Table II) Dash No. (Table I) D = D Hole Mounting Flats N = None E = Environmental Gland Seal Style (Omit for Standard Non-Environmental Style) Add Letter K for Adapter to accommodate PEEK Conduit Panel Cut-Out D .500 (12.7) Ref Typ G C Typ .125 (3.2) Max Panel thickness Typ F Style E Environmenal See Part Number Development 2.130 (54.1) Max 1.410 (35.8) Max Gland Seal range Tubing shown for reference only See Note 2 Tubing I.D. E A Thread .190 (4.8) Typ Knurl or Flute Style Manufacurer's Option, Typ. Non-Environmental (See Part Number Development) Table I Dash No. 06 09 10 12 14 16 20 24 28 32 40 48 56 64 A Thread Class 2A M16 x 1.0 M16 x 1.0 M16 x 1.0 M16 x 1.0 M20 x 1.0 M20 x 1.0 M27 x 1.0 1-20 UNEF M27 x 1.0 M36 x 1.0 1 1/2 -18 UNEF 1 3/4 -18 UNEF 2 -18 UNS 2 1/4 -16 UN B +.015 (0.4) -.000 (0.0) .640 (16.3) .640 (16.3) .640 (16.3) .640 (16.3) .802 (20.4) .802 (20.4) 1.078 (27.4) 1.005 (25.5) 1.078 (27.4) 1.437 (36.5) 1.505 (38.2) 1.755 (44.6) 2.005 (50.9) 2.255 (57.3) C Across Flats .875 (22.2) .875 (22.2) .875 (22.2) .875 (22.2) 1.062 (27.0) 1.062 (27.0) 1.312 (33.3) 1.312 (33.3) 1.312 (33.3) 1.750 (44.5) 1.750 (44.5) 2.000 (50.8) 2.250 (57.2) 2.500 (63.5) D +.000 (0.0) -.015 (0.4) .595 (15.1) .595 (15.1) .595 (15.1) .595 (15.1) 1.752 (44.5) 1.752 (44.5) 1.069 (27.2) .937 (23.8) 1.029 (26.1) 1.403 (35.6) 1.437 (36.5) 1.687 (42.8) 1.937 (49.2) 2.187 (55.5) E Max .500 (12.7) .600 (15.2) .630 (16.0) .700 (17.8) .760 (19.3) .850 (21.6) .970 (24.6) 1.140 (29.0) 1.280 (32.5) 1.450 (36.8) 1.760 (44.7) 2.060 (52.3) 2.390 (60.7) 2.570 (65.3) F Min .162 (4.1) .244 (6.2) .274 (7.0) .326 (8.3) .382 (9.7) .434 (11.0) .539 (13.7) .649 (16.5) .769 (19.5) .868 (22.0) 1.078 (27.4) 1.200 (30.5) 1.400 (35.6) 1.600 (40.6) G Max 1.020 (25.9) 1.020 (25.9) 1.020 (25.9) 1.020 (25.9) 1.180 (30.0) 1.180 (30.0) 1.450 (36.8) 1.390 (35.3) 1.450 (36.8) 1.810 (46.0) 1.890 (48.0) 2.140 (54.4) 2.390 (60.7) 2.640 (67.1) Tubing I.D. Min Max .181 (4.6) .273 (6.9) .306 (7.8) .364 (9.2) .427 (10.8) .485 (12.3) .608 (15.4) .730 (18.5) .860 (21.8) .187 (4.7) .281 (7.1) .312 (7.9) .375 (9.5) .437 (11.1) .500 (1.3) .625 (15.9) .750 (19.1) .875 (22.2) Gland Seal Range Min Max .156 (4.0) .156 (4.0) .156 (4.0) .188 (4.8) .250 (6.4) .250 (6.4) .375 (9.5) .375 (9.5) .438 (11.1) .625 (15.9) .250 (6.4) .250 (6.4) .250 (6.4) .312 (7.9) .438 (11.1) .438 (11.1) .625 (15.9) .625 (15.9) .750 (19.1) .938 (23.8) .975 (24.8) 1.000 (25.4) 1.210 (30.7) 1.250 (31.8) .875 (22.2) 1.250 (31.8) 1.437 (36.5) 1.500 (38.1) 1.000 (25.4) 1.375 (34.9) 1.688 (42.9) 1.750 (44.5) 1.250 (31.8) 1.625 (41.3) 2.937 (74.6) 2.000 (50.8) 1.250 (31.8) 1.625 (41.3) Table II TABLE 2 XM XW XB XO Electroless Nickel Cadmium Olive Drab Over Electroless Nickel No Plating - Black Material No Plating - Base Material Non-conductive NOTES: 1. Metric dimensions (mm) are in parentheses and are for reference only. 2. Convoluted tubing size, tubing to be ordered separately (See Page I-23). © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com D-33 Series 74 Convoluted Tubing