712AK127M16

712-127 - Types B, D & E Straight, 45° & 90° Non-Environmental User-Installable Connector Fitting for Series 74 Helical Convoluted Tubing Series 74 Convoluted Tubing TYPES B, D, & E 712 F S 127 M 16 20 - 6 1 B Product Series Conn. Designator A, F, H, L, or S (Pages F-3 to F-5) Angular Function: K = 45° L = 90° S = Straight Basic No. Conduit Type B, D, or E Style 1 or 2 Length in 1/2 inch (12.7) increments (Example: 6 = 3.0 inches (76.2)) Dash No. (Table III) Shell Size (Table I) Finish (Table II) LENGTH ± .060 (1.52) A THREAD (PAGE F-17) LENGTH ± .060 (1.52) SHIELD TUBING C DIA (Page F-17) TUBING I.D. J DIA STYLE 2 .88 (22.4) MAX E 45° STRAIGHT G F H STYLE 2 (45° & 90°) 45° 90° © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com D-18 712-127 - Types B, D & E Straight, 45° & 90° Non-Environmental User-Installable Connector Fitting for Series 74 Helical Convoluted Tubing SHELL SIZE A,F,L,S H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 28 -32 -36 -- E MAX .639 (16.2) .664 (16.9) .688 (17.5) .705 (17.9) .732 (18.6) .748 (19.0) .773 (19.6) .800 (20.3) .823 (20.9) 1.041 (26.4) 1.092 (27.7) 1.138 (28.9) TABLE I F MAX .950 (24.1) .980 (24.9) 1.000 (25.4) 1.030 (26.2) 1.050 (26.7) 1.060 (26.9) 1.080 (27.4) 1.120 (28.4) 1.150 (29.2) 1.320 (33.5) 1.360 (34.5) 1.410 (35.8) G MAX .750 (19.1) .810 (20.6) .870 (22.1) .920 (23.4) .980 (24.9) 1.020 (25.9) 1.080 (27.4) 1.140 (29.0) 1.200 (30.5) 1.480 (37.6) 1.610 (40.9) 1.720 (43.7) H MAX 1.060 (26.9) 1.120 (28.4) 1.180 (30.0) 1.250 (31.8) 1.310 (33.3) 1.330 (33.8) 1.390 (35.3) 1.470 (37.3) 1.540 (39.1) 1.780 (45.2) 1.870 (47.5) 1.980 (50.3) TABLE II SYMBOL FINISH B J M N NC NF T Olive Drab over Cadmium Plate Gold Iridite over Cadmium Plate over Nickel Electroless Nickel Olive Drab over Cadmium Plate over Nickel Zinc-Cobalt, Olive Drab Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) Bright Dip Cadmium Plate over Nickel DASH NO. 06 09 10 12 14 16 20 24 28 32 40 48 56 64 TABLE III TUBING I.D. MIN MAX .181 (4.6) .188 (4.8) .273 (6.9) .281 (7.1) .306 (7.8) .312 (7.9) .364 (9.2) .375 (9.5) .427 (10.8) .437 (11.1) .485 (12.3) .500 (12.7) .608 (15.4) .625 (15.9) .730 (18.5) .750 (19.1) .860 (21.8) .875 (22.2) .975 (24.8) 1.000 (25.4) 1.210 (30.7) 1.250 (31.8) 1.437 (36.5) 1.500 (38.1) 1.688 (42.9) 1.750 (44.5) 1.937 (49.2) 2.000 (50.8) J MAX .910 (23.1) 1.000 (25.4) 1.032 (26.2) 1.095 (27.8) 1.167 (29.6) 1.220 (31.0) 1.345 (34.2) 1.470 (37.3) 1.595 (40.5) 1.720 (43.7) 1.970 (50.0) 2.220 (56.4) 2.470 (62.7) 2.720 (69.1) NOTES: 1. Metric dimensions (mm) are in parentheses. 2. Tubing shown for reference only. 3. When tubing I.D. max exceeds inside diameter of connector shell, style 2 may be supplied. Refer to pages F-15 and F-16. © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com D-19 Series 74 Convoluted Tubing