712FS360M16

712-360 - Type A Straight, 45° & 90° Non-Environmental User-Installable Connector Fitting for PEEK Series 74 Helical Convoluted Tubing Series 74 Convoluted Tubing 712 F S 360 M 16 20 - 6 1 TYPE A For use with PEEK convoluted tubing only - Part number 120-100-1-1-XX (page D-3). Product Series Conn. Designator A, D, F, H, L, or S (Pages F-3 to F-5) Angular Function: H = 45° J = 90° S = Straight Basic No. Style 1 or 2 Length in 1/2 inch (12.7) increments (Example: 6 = 3.0 inches (76.2)) Dash No. (Table III) Shell Size (Table I) Finish (Table II) LENGTH ± .060 (1.52) O-RING A THREAD (Page F-17) LENGTH ± .060 (1.52) PEEK CONVOLUTED TUBING C DIA (Page F-17) TUBING I.D. J DIA STYLE 2 STRAIGHT .880 (22.4) MAX STRAIGHT E 45° G F 45° STYLE 2 45° & 90° 90° H © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com D-16 712-360 - Type A Straight, 45° & 90° Non-Environmental User-Installable Connector Fitting for PEEK Series 74 Helical Convoluted Tubing SHELL SIZE A,D, F,L,S H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 28 -32 -36 -- E MAX .639 (16.2) .664 (16.9) .688 (17.5) .705 (17.9) .732 (18.6) .748 (19.0) .773 (19.6) .800 (20.3) .823 (20.9) 1.041 (26.4) 1.092 (27.7) 1.138 (28.9) TABLE I F MAX .950 (24.1) .980 (24.9) 1.000 (25.4) 1.030 (26.2) 1.050 (26.7) 1.060 (26.9) 1.080 (27.4) 1.120 (28.4) 1.150 (29.2) 1.320 (33.5) 1.360 (34.5) 1.410 (35.8) G MAX .750 (19.1) .810 (20.6) .870 (22.1) .920 (23.4) .980 (24.9) 1.020 (25.9) 1.080 (27.4) 1.140 (29.0) 1.200 (30.5) 1.480 (37.6) 1.610 (40.9) 1.720 (43.7) H MAX 1.060 (26.9) 1.120 (28.4) 1.180 (30.0) 1.250 (31.8) 1.310 (33.3) 1.330 (33.8) 1.390 (35.3) 1.470 (37.3) 1.540 (39.1) 1.780 (45.2) 1.870 (47.5) 1.980 (50.3) TABLE II SYMBOL FINISH B J M N NC NF T Olive Drab over Cadmium Plate Gold Iridite over Cadmium Plate over Nickel Electroless Nickel Olive Drab over Cadmium Plate over Nickel Zinc-Cobalt, Olive Drab Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) Bright Dip Cadmium Plate over Nickel DASH NO. 06 09 12 16 20 24 32 40 48 56 64 TABLE III TUBING I.D. MIN MAX .181 (4.6) .187 (4.7) .273 (6.9) .281 (7.1) .364 (9.2) .375 (9.5) .485 (12.3) .500 (12.7) .608 (15.4) .625 (15.9) .730 (18.5) .750 (19.1) .975 (24.8) 1.000 (25.4) 1.210 (30.7) 1.250 (31.8) 1.471 (37.4) 1.500 (38.1) 1.721 (42.9) 1.750 (44.5) 1.971 (49.2) 2.000 (50.8) J MAX .720 (18.3) .821 (20.9) .915 (23.2) 1.040 (26.4) 1.165 (29.6) 1.290 (32.8) 1.540 (39.1) 1.790 (45.5) 2.040 (51.8) 2.290 (58.2) 2.540 (64.5) NOTES: 1. When tubing I.D. max exceeds inside diameter of connector shell, style 2 may be supplied. Refer to pages F-15 and F-16. 2. Metric dimensions (mm) are in parentheses. 3. Tubing shown for reference only. 4. O-Ring not supplied with Connector Designator A. © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com D-17 Series 74 Convoluted Tubing