712LK277M16

712-277 - Types C & F Straight, 45° & 90° EMI Environmental User-Installable Connector Fitting for Series 74 Helical Convoluted Tubing Series 74 Convoluted Tubing 712 F S 277 M 16 20 - 6 1 TYPES C&F Product Series Conn. Designator A, D, F, H, L, or S (Pages F-3 to F-5) Angular Function: K = 45° L = 90° S = Straight Basic No. LENGTH ± .060 (1.52) Style 1 or 2 Length in 1/2 inch (12.7) increments (Example: 6 = 3.0 inches (76.2)) Dash No. (Table II) Shell Size (Table I) Finish (Table III) LENGTH ±.060 (1.52) O-RING A THREAD (Page F-17) .945 (24.0) MAX (TYPICAL) C DIA (Page F-17) TUBING I.D. (REF) J DIA STYLE 2 (STRAIGHT) .88 (22.4) MAX STRAIGHT Wrench Flats E 45° F G STYLE 2 (45° & 90°) 45° 90° H © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com D-20 712-277 - Types C & F Straight, 45° & 90° EMI Environmental User-Installable Connector Fitting for Series 74 Helical Convoluted Tubing SHELL SIZE A,D,F,L,S H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 28 -32 -36 -- E MAX .639 (16.2) .664 (16.9) .688 (17.5) .705 (17.9) .732 (18.6) .748 (19.0) .773 (19.6) .800 (20.3) .823 (20.9) 1.041 (26.4) 1.092 (27.7) 1.138 (28.9) TABLE I F MAX 1.23 (31.2) 1.26 (32.0) 1.28 (32.5) 1.31 (33.3) 1.33 (33.8) 1.34 (34.0) 1.36 (34.5) 1.40 (35.6) 1.43 (36.3) 1.60 (40.6) 1.64 (41.7) 1.69 (42.9) G MAX .750 (19.1) .810 (20.6) .870 (22.1) .920 (23.4) .980 (24.9) 1.020 (25.9) 1.080 (27.4) 1.140 (29.0) 1.200 (30.5) 1.480 (37.6) 1.610 (40.9) 1.720 (43.7) H MAX 1.34 (34.0) 1.40 (35.6) 1.46 (37.1) 1.53 (38.9) 1.59 (40.4) 1.61 (40.9) 1.67 (42.4) 1.75 (44.5) 1.82 (46.2) 2.06 (52.3) 2.15 (54.6) 2.26 (57.4) DASH NO. 06 09 10 12 14 16 20 24 28 32 40 48 56 64 TABLE III SYMBOL FINISH B J M N NC NF T TABLE II TUBING I.D. MIN MAX .181 (4.6) .188 (4.8) .273 (6.9) .281 (7.1) .306 (7.8) .312 (7.9) .364 (9.2) .375 (9.5) .427 (10.8) .437 (11.1) .485 (12.3) .500 (12.7) .608 (15.4) .625 (15.9) .730 (18.4) .750 (19.1) .860 (21.8) .875 (22.2) .975 (24.8) 1.000 (25.4) 1.210 (30.6) 1.250 (31.8) 1.437 (36.5) 1.500 (38.1) 1.688 (42.9) 1.750 (44.5) 1.937 (49.2) 2.000 (50.8) J MAX 1.09 (27.7) 1.16 (29.5) 1.22 (31.0) 1.28 (32.5) 1.34 (34.0) 1.41 (35.8) 1.53 (38.9) 1.66 (42.2) 1.78 (45.2) 1.91 (48.5) 2.28 (57.9) 2.59 (65.8) 2.91 (73.9) 3.03 (77.0) NOTES: 1. O-Ring not supplied on connector designator A. 2. Metric dimensions (mm) are in parentheses. 3. Tubing shown for reference only. 4. When tubing I.D. max exceeds inside diameter of connector shell, style 2 may be supplied. Refer to pages F-15 and F-16. Olive Drab over Cadmium Plate Gold Iridite over Cadmium Plate over Nickel Electroless Nickel Olive Drab over Cadmium Plate over Nickel Zinc-Cobalt, Olive Drab Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) Bright Dip Cadmium Plate over Nickel © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com D-21 Series 74 Convoluted Tubing