712S380B1206-3B

712-380 - Types B, C, D, E, F & G User-Installable Bulkhead Fitting for Series 74 Helical Convoluted Tubing Series 74 Convoluted Tubing TYPES B, C, D, E, F, & G BULKHEAD TO BE USED WITH ADAPTERS AND TRANSITIONS SHOWN ON PAGES G-1 THROUGH G-19 O-RING A THREAD TYP 712 S 380 M 16 16 - 3 C Product Series Angular Function S = Straight Basic No. Finish (Table III) TubingType (B, C, D, E, F & G) Length in 1/2 inch (12.7) increments (Example: 6 = 3.0 inches (76.2)) Minimum Length: 1.5 (38.1) Dash No. (Table II) Dash No. (Table I) LENGTH ± .060 (1.52) .945 (24.0) MAX B TYP C TYP TUBING I.D. E MAX D MAX TYPES C & F ENVIRONMENTAL Wrench Flats LENGTH LENGTH E REF F REF TYPES B, D, & E NON-ENVIRONMENTAL TYPE G ENVIRONMENTAL CAGE Codes 06324 Printed in U.S.A. © 2003 Glenair, Inc. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com D-22 712-380 - Types B, C, D, E, F & G User-Installable Bulkhead Fitting for Series 74 Helical Convoluted Tubing TABLE I B MAX .640 (16.3) .690 (17.5) .690 (17.5) .760 (19.3) .890 (22.6) .890 (22.6) 1.024 (26.0) 1.152 (29.3) 1.363 (34.6) 1.488 (37.8) 1.676 (42.6) 1.960 (49.8) 2.210 (56.1) 2.460 (62.5) A THREAD DASH NO. CLASS 2B 06 7/16 - 28 UNEF 09 9/16 - 24 UNEF 10 9/16 - 24 UNEF 12 5/8 - 24 UNEF 14 11/16 - 24 UNEF 16 3/4 - 20 UNEF 20 7/8 - 20 UNEF 24 1 - 20 UNEF 28 1 3/16 - 18 UNEF 32 1 5/16 - 18 UNEF 40 1 1/2 - 18 UNEF 48 1 3/4 - 18 UNS 56 2 - 18 UNS 64 2 1/4 - 16 UN C MAX DASH DIA NO. TABLE II .188 (4.8) 06 .281 (7.1) 09 .312 (7.9) 10 .375 (9.5) 12 .438 (11.1) 14 .500 (12.7) 16 .625 (15.9) 20 .750 (19.1) 24 .875 (22.2) 28 1.000 (25.4) 32 1.250 (31.8) 40 1.500 (38.1) 48 1.750 (44.5) 56 2.000 (50.8) 64 TABLE II TUBING I.D. DASH NO. MIN MAX 06 .181 (4.6) .188 (4.8) 09 .273 (6.9) .281 (7.1) 10 .306 (7.8) .312 (7.9) 12 .359 (9.1) .375 (9.5) 14 .427 (10.8) .437 (11.1) 16 .480 (12.2) .500 (12.7) 20 .603 (15.3) .625 (15.9) 24 .725 (18.4) .750 (19.1) 28 .860 (21.8) .875 (22.2) 32 .970 (24.6) 1.000 (25.4) 40 1.205 (30.6) 1.250 (31.8) 48 1.437 (36.5) 1.500 (38.1) 56 1.688 (42.9) 1.750 (44.5) 64 1.937 (49.2) 2.000 (50.8) D MAX 1.09 (27.7) 1.16 (29.5) 1.22 (31.0) 1.28 (32.5) 1.34 (34.0) 1.41 (35.8) 1.53 (38.9) 1.66 (42.2) 1.78 (45.2) 1.91 (48.5) 2.28 (57.9) 2.59 (65.8) 2.91 (73.9) 3.03 (77.0) E MAX .78 (19.8) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.22 (31.0) 1.28 (32.5) 1.41 (35.8) 1.53 (38.9) 1.71 (43.4) 1.84 (46.7) 2.16 (54.9) 2.46 (62.5) 2.78 (70.6) 3.03 (77.0) TABLE III SYMBOL FINISH B J M N NC NF T © 2003 Glenair, Inc. Olive Drab over Cadmium Plate Gold Iridite over Cadmium Plate over Nickel Electroless Nickel Olive Drab over Cadmium Plate over Nickel Zinc-Cobalt, Olive Drab Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) Bright Dip Cadmium Plate over Nickel CAGE Codes 06324 NOTES: 1. Metric dimensions (mm) are in parentheses. 2. Tubing shown for reference only. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com D-23 Series 74 Convoluted Tubing