712S387S3208

712-387 Straight, 45° & 90° Environmental User-Installable Fitting for Series 75 Flexible Metal-Core Conduit 712 S 387 M 16 12 - 6 A Product Series Conduit Type Length in 1/2 inch (12.7) increments (Example: 6 = 3.0 inches (76.2)) Minimum Length: Dash No. (Table II) 08 to 24 = 1.50 (50.8) Dash No. (Table II) 32 to 96 = 2.00 (63.5) Dash No. (Table II) Thread Dash No. (Table I) Series 75 Metal-Core Conduit TO BE USED WITH ADAPTERS AND TRANSITIONS SHOWN ON PAGES G-1 THROUGH G-8 Angular Function H = 45° J = 90° S = Straight Basic No. Material/Finish (Table III) LENGTH O-RING A THREAD (Table I) E CONE LENGTH B C TYP TYP CONDUIT F TYP I.D. STRAIGHT G 45° J H 90° 45° K © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com C-14 712-387 Straight, 45° & 90° Environmental User-Installable Fitting for Series 75 Flexible Metal-Core Conduit TABLE I A THREAD B CLASS 2B MAX 1/2 - 20 UNF .640 (16.3) 5/8 - 24 UNEF .760 (19.3) 3/4 - 20 UNEF .890 (22.6) 7/8 - 20 UNEF 1.024 (26.0) 1 - 20 UNEF 1.152 (29.3) 1 5/16 - 18 UNEF 1.488 (37.8) 1 1/2 - 18 UNEF 1.676 (42.6) 1 3/4 - 18 UNS 1.960 (49.8) 2 - 18 UNS 2.210 (56.1) 2 1/4 - 16 UN 2.460 (62.5) 2 3/4 - 16 UN 2.930 (74.4) 3 1/4 - 16 UN 3.450 (87.6) DASH NO. 08 12 16 20 24 32 40 48 56 64 80 96 C DIA .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 1.750 (44.5) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) NOTES: 1. Metric dimensions (mm), are in parentheses. 2. F dimension is based on type A construction. Add .125 (3.2) to listed dimensions for each additional shield types B through D. DASH NO. 08 12 16 20 24 32 40 48 56 64 80 96 CONDUIT I.D. .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 1.750 (44.5) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) E .75 (19.1) .75 (19.1) .75 (19.1) .75 (19.1) .75 (19.1) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) TABLE II F MAX G (NOTE 2) MAX 1.16 (29.5) .624 (15.8) 1.34 (34.0) .654 (16.6) 1.46 (37.1) .688 (17.5) 1.65 (41.9) .705 (17.9) 1.84 (46.7) .732 (18.6) 2.02 (51.3) .773 (19.6) 2.34 (59.4) .823 (20.9) 2.72 (69.0) 1.041 (26.4) 2.96 (75.2) 1.062 (27.0) 3.22 (81.8) 1.092 (27.7) 3.86 (98.0) 1.190 (30.2) 4.38 (111.3) 1.250 (31.8) TABLE III H MAX 1.700 (43.2) 1.730 (43.9) 1.750 (44.5) 1.780 (45.2) 1.800 (45.7) 2.020 (51.3) 2.090 (53.1) 2.360 (59.9) 2.410 (61.2) 2.450 (62.2) 2.550 (64.8) 2.610 (66.3) J MAX .750 (19.1) .810 (20.6) .870 (22.1) .920 (23.4) .980 (24.9) 1.080 (27.4) 1.200 (30.5) 1.480 (37.6) 1.550 (39.4) 1.610 (40.9) 1.860 (47.2) 1.990 (50.5) K MAX 1.810 (46.0) 1.870 (47.5) 1.930 (49.0) 2.000 (50.8) 2.060 (52.3) 2.390 (60.7) 2.540 (64.5) 2.870 (72.9) 2.960 (75.2) 3.070 (78.0) 3.320 (84.3) 3.450 (87.6) SYMBOL A B C M NC S MATERIAL Aluminum Alloy, 6061-T6 per QQ-A-225/8 Brass, ASTM B16 per QQ-B-626 Corrosion Resistant Steel per QQ-S-763, 300 Series Aluminum Alloy, 6061-T6 per QQ-A-225/8 Aluminum Alloy, 6061-T6 per QQ-A-225/8 Carbon Steel, B1113, per QQ-S-637 FINISH Cadmium, Olive Drab, per QQ-P-416, over Electroless Nickel per ASTMB733-90, and MIL-C-26074, 500 Hour Salt Spray Passivate per QQ-P-35 Electroless Nickel per ASTMB733-90 and MIL-C-26074 Zinc Cobalt, Olive Drab Cadmium, Olive Drab per QQ-P-416, over Electroless Nickel per ASTM B733-90 and MIL-C-26074, 500 Hour Salt Spray CAGE Codes 06324 Printed in U.S.A. © 2003 Glenair, Inc. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com C-15 Series 75 Metal-Core Conduit