720HA103NC

Pre-Terminated Assemblies 750-102 750-103 and 750-115 Connector to Connector Pre-Terminated Assemblies Series 72 & 74 Tubing & Series 75 Conduit FOR CONNECTOR-TO-CONNECTOR APPLICATIONS CONNECTOR DESIGNATORS (A-B-D-E-F-G-H-J-K-L-S) 750 N A 102 M F20 1 A16 2-24-36 Product Series 720 = Series 72 740 = Series 74 *** 750 = Series 75 Jacket H = With Hypalon Jacket V = With Viton Jacket N = With Neoprene Jacket X = No Jacket E = EPDM Conduit Type Adapter Material 102 = Aluminum 103 = Brass 115 = Stainless Steel TABLE I SYMBOL B J M N NC NF T Z1 FINISH Olive Drab over Cadmium Plate Gold Iridite over Cadmium Plate over Nickel Electroless Nickel Olive Drab over Cadmium Plate over Nickel Zinc-Cobalt, Olive Drab Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) Bright Dip Cadmium Plate over Nickel Passivate Length in inches * Conduit Dash No. ** Style 1 or 2 Adapter B: Conn. Shell Size (For conn. des. B add conn. mfr. symbol from Page F-13, e.g. 24H if mating to an Amphenol connector) Style 1 or 2 (Style 2 not available with N or T) Adapter A: Conn. Shell Size (For conn. des. B add conn. mfr. symbol from Page F-13, e.g. 20H if mating to an Amphenol connector) Finish (Table I) LENGTH * O-RING A THREAD (Page F-17) C OR D DIA (Page F-17) 1.69 (42.9) MAX. REF. ADAPTER A Metric dimensions (mm) are indicated in parentheses. ADAPTER B * Length tolerance is ± .250 (12.7) for lengths up to 24 inches (619.6 mm). Length tolerance for longer lengths is ± one percent (1%) of the length. ** *** Consult factory for fittings using 3.000" (76.2) conduit. Pre-terminated assemblies using product Series 74 will be supplied with FEP material, standard wall thickness, standard convolutions, tin/ copper braid, and neoprene jacket. For other options consult factory. © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com B-6 750-102 750-103 and 750-115 Pre-Terminated Assemblies for M28840/5, /25, /27 & /30 Adapters Series 72 & 74 Tubing & Series 75 Conduit 750 N A 106 M 24-36 Product Series 750 = Series 75 Neoprene Jacket N = With Neoprene Jacket X = Without Neoprene Jacket Conduit Type Length in inches * Dash No. (Table I) Finish (Table II) End Fitting Material 106 = Aluminum 107 = Brass 108 = Stainless Steel USE WITH ADAPTERS M28840/5 M28840/25 M28840/27 M28840/30 1.50 (44.5) LENGTH * A DIA M28840/22 BUSHING M28840/4 AC OR BC CONDUIT DASH NO. 12 16 20 24 32 40 48 64 TABLE I CONDUIT MIL-C-28840/4 I.D. SIZE REF. .375 (9.5) 03 .500 (12.7) 04 .625 (15.9) 05 .750 (19.1) 06 1.000 (25.4) 08 1.250 (31.8) 10 1.500 (38.1) 12 2.000 (50.8) 16 TABLE II A DIA .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.375 (34.9) 1.625 (41.3) 1.875 (47.6) 2.375 (60.3) SYMBOL FINISH B J M N NC NF T Z1 Olive Drab over Cadmium Plate Gold Iridite over Cadmium Plate over Nickel Electroless Nickel Olive Drab over Cadmium Plate over Nickel Zinc-Cobalt, Olive Drab Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) Bright Dip Cadmium Plate over Nickel Passivate Metric dimensions (mm) are indicated in parentheses. * Length tolerance is ± .250 (12.7) for lengths up to 24 inches (619.6 mm). Length tolerance for longer lengths is ± one percent (1%) of the length. © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com B-7 Pre-Terminated Assemblies