750NA108N

750-106 Pre-Terminated Assemblies for M28840/5, /25, /27 & /30 Adapters Series 72 & 74 Tubing & Series 75 Conduit 750 N A 106 M 24-36 Product Series 750 = Series 75 Neoprene Jacket N = With Neoprene Jacket X = Without Neoprene Jacket Conduit Type Length in inches * Dash No. (Table I) Finish (Table II) End Fitting Material 106 = Aluminum 107 = Brass 108 = Stainless Steel USE WITH ADAPTERS M28840/5 M28840/25 M28840/27 M28840/30 1.50 (44.5) LENGTH * A DIA M28840/22 BUSHING M28840/4 AC OR BC CONDUIT DASH NO. 12 16 20 24 32 40 48 64 TABLE I CONDUIT MIL-C-28840/4 I.D. SIZE REF. .375 (9.5) 03 .500 (12.7) 04 .625 (15.9) 05 .750 (19.1) 06 1.000 (25.4) 08 1.250 (31.8) 10 1.500 (38.1) 12 2.000 (50.8) 16 TABLE II A DIA .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.375 (34.9) 1.625 (41.3) 1.875 (47.6) 2.375 (60.3) SYMBOL FINISH B J M N NC NF T Z1 Olive Drab over Cadmium Plate Gold Iridite over Cadmium Plate over Nickel Electroless Nickel Olive Drab over Cadmium Plate over Nickel Zinc-Cobalt, Olive Drab Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) Bright Dip Cadmium Plate over Nickel Passivate Metric dimensions (mm) are indicated in parentheses. * Length tolerance is ± .250 (12.7) for lengths up to 24 inches (619.6 mm). Length tolerance for longer lengths is ± one percent (1%) of the length. © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com B-7 Pre-Terminated Assemblies