759-840-32-36-181

MIL-PRF 24758A Product Series Basic No. A thread (see M24758-2 for recommended torque) D B I.D. © 2007 Glenair, Inc. www.glenair.com 759-840 Adapter to Adapter Factory Terminated Conduit Assembly 759 - 840 - 32 - 36 - 181 Conduit/Fitting Dash No., Table I Length (In Inches) See note 2 Mod Code for single end applications NOTE: -181 mod code is used to create single-ended conduit assemblies. One end is terminated with a solder fitting for the attachment of MIL-PRF 24758A adapters, while the other end is left unfinished for use with user installable fittings. Length *note 2 1.50 (38.10) max B I.D. M24758 - (PRF size) with glenair “BlueJacket” APPLICATION NOTES 1. Assembly identified with manufacurer’s code identification number (Glenair, part number and classification code 490). 2. Length tolerance is 0-24” = +1/4”, for longer lengths is +1% of length. 3. Glenair 600 series backshell assembly tools are recommended for assembly installation. 4. Material / Finish: Adapter, ferrule & coupling nut, AISI 316 stainless steel / electroless nickel, matte finish. 5. Metric dimensions (mm) are indicated in parentheses. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com 54 759-840 Single Ended Adapter Fitting Assembly Factory Terminated Conduit Assembly TABLE I DASH NO 08 12 16 20 24 32 40 48 64 80 96 MIL PRF SIZE A J B K C D E F G H L B MIN. 0.245 (6.22) 0.370 (9.40) 0.495 (12.57) 0.620 (15.75) 0.745 (18.92) 0.995 (25.27) 1.245 (31.62) 1.495 (37.97) 1.995 (50.67) 2.495 (63.37) 2.995 (76.07) C THREAD CLASS 2B .438-28 UNEF .563-24 UNEF .688-24 UNEF .813-20 UNEF .938-20 UNEF 1.250-18 UNEF 1.563-18 UNEF 1.875-16 UN 2.375-16 UN 2.875-16 UN 3.375-16 UN © 2007 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com 55 MIL-PRF 24758A