759-861H20C

Factory Terminated Conduit Assembly 759-861 Connector to Connector MIL-PRF 24758A A Basic Number Adapter “A” Connector Designator A,C,D,F,G,H & W (Tables I & II) Adapter “B” Connector Designator A,C,D,F,G,H & W (Tables I & II) Conduit Dash Number (Table II) 759-861 A 16 Adapter “A” Shell Size (Table II) H 15 - 20 - 50.5 Adapter “B” Shell Size (Table II) Length In Inches (See Note 3) A Thread 1.500 (38.1) Max Length See P/n Development (See Note 3) B I.D END A END B Wrench Flats (Hex) M24758-(Prf Size) With Glenair "Blue Jacket" Medium Raised Diamond Knurl A Thread APPLICATION NOTES 1. 2. 3. Assembly identified with manufacurer’s code identification. Glenair 600 series backshell assembly tools are recommended for assembly installation. Length tolerance is 0-24” = +1/4”, for longer lengths is +1% of length. 4. Material / Finish: Adapter, ferrule & coupling nut - AISI 316L stainless steel / electroless nickel, matte finish. Metric dimensions (mm) are indicated in parentheses. 5. © 2010 Glenair, Inc. www.glenair.com CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com A-80 Factory Terminated Conduit Assembly TABLE I: CONNECTOR CODE CONN. CODE A C D F G H W SPECIFICATION MIL-DTL-5015 (MS34**) MIL-DTL-26482 Series II MIL-DTL-83723 Series I, III MIL-C-22992 Series R MIL-C-26482 Series I MIL-DTL-38999, Series I MIL-C-28840 MIL-DTL-38999 Series III, IV Glenair Series 22 (Geo-Marine®) TABLE II: CONDUIT DASH NO. CONDUIT DASH NO 08 12 16 20 24 32 40 48 64 80 96 MIL PRF SIZE A J B K C D E F G H L B MIN. .245 (6.22) .370 (9.40) .495 (12.57) .620 (15.75) .745 (18.92) .995 (25.27) 1.245 (31.62) 1.495 (37.97) 1.995 (50.67) 2.495 (63.37) 2.995 (76.07) © 2010 Glenair, Inc. www.glenair.com CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com A-81 MIL-PRF 24758A 759-861 Connector to Connector A