759-862FA16

Factory Terminated Conduit Assembly 759 - 862 A 16 T 20 - 50.5 Product Series Basic No. ‘A’ End Connector Designator A,C,D,F,G,H & W (Table I & II) ‘A’ End Shell Size (Table I) Length see P/N development A thread 1.50 Max I.D Table II Length (in inches) i.e. 50.5 = 50 1/2 inches Conduit Dash No. (Table III) ‘B’ End T = Transition Adapters (Table III) 759-862 Connector to Adapter MIL-PRF 24758A TABLE II CONN. CODE A C D F G H W SPECIFICATION MIL-DTL-5015 (MS34**), MIL-C-26482 SER. II, MIL-DTL83723 SER. I, III. MIL-C-22992 SER. R MIL-C-26482 SER. I MIL-DTL-38999, SER. I MIL-C-28840 MIL-DTL-38999 SER. III, IV GLENAIR SER. 22 (GEO MARINE) © 2007 Glenair, Inc. www.glenair.com B Ref (M24758-(PRF Size) with Glenair “BlueJacket” C thread TABLE III DASH MIL PRF NO SIZE 08 12 16 20 24 32 40 48 64 80 96 A J B K C D E F G H L B MIN. 0.245 (6.22) 0.370 (9.40) 0.495 (12.57) 0.620 (15.75) 0.745 (18.92) 0.995 (25.27) 1.245 (31.62) 1.495 (37.97) 1.995 (50.67) 2.495 (63.37) 2.995 (76.07) C THREAD CLASS 2B .438-28 UNEF .563-24 UNEF .688-24 UNEF .813-20 UNEF .938-20 UNEF 1.250-18 UNEF 1.563-18 UNEF 1.875-16 UN 2.375-16 UN 2.875-16 UN 3.375-16 UN APPLICATION NOTES 1. Assembly identified with manufacurer’s code identification number (Glenair, part number and classification code 490). 2. Length tolerance is 0-24” = +1/4”, for longer lengths is +1% of length. 3. Glenair 600 series backshell assembly tools are recommended for assembly installation. 4. Material / Finish: Adapter, ferrule & coupling nut, AISI 316 stainless steel / electroless nickel, matte finish. 5. Metric dimensions (mm) are indicated in parentheses. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com 52 Factory Terminated Conduit Assembly TABLE I CONNECTOR DESIGNATOR A C D 08 08 10 10 12 12 12 14 14 14 16 16 18 18 20 20 22 22 22 24 24 24 [25] 23 F 25 [J] 24 25 G 24 28 28 32 32 36 36 40 40 44 48 33 J 29 H 22 22 [23] 23 [H] 20 20 [21] 21 [G] 19 E 20 16 18 18 [19] 19 [F] 17 D 18 16 [17] 17 [E] 15C 16 14 [15] 15 [D] 13 B 14 12 [13] 13 [C] 11 A 12 10 [11] 11 [B] 10 F 08 [9] 09 [A] G H W A THREAD REF 7/16-28 UNEF M12 X 1 - 6H 1/2-20 UNF 9/16-24 UNEF M15 X 1 - 6H 5/8-24 UNEF 11/16-24 UNEF M18 X 1 - 6H 3/4-20 UNEF 13/16-20 UNEF M22 X 1 - 6H 7/8-20 UNEF 15/16-20 UNEF M25 X 1 - 6H 1-20 UNEF 1 1/16-18 UNEF M28 X 1 - 6H 1 1/8-18 UNEF 1 1/8-16 UN 1 3/16-18 UNEF M31 X 1 - 6H 1 1/4-18 UNEF 1 1/4-16 UN 1 5/16-18 UNEF M34 X 1 - 6H 1 3/8-18UNEF 1 3/8-16 UN 1 7/16-18 UNEF M37 X 1 - 6H 1 1/2-16 UN 1 9/16-18 UNEF 1 5/8-18 UNEF 1 3/4-18 UNS 1 7/8-16 UN 2-18 UNS 2 1/16-16 UNS 2 1/4-16 UN 2 5/16-16 UNS 2 1/2-16 UN 2 5/8-16 UN 2 3/4-16 UN 3-16 UN © 2007 Glenair, Inc. www.glenair.com CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com 53 MIL-PRF 24758A 759-862 Connector to Adapter