770-001S104R

SERIES 77 Lipped, Straight Shrink Boots 770-001S Straight Boot, with Eyelet How to Order Straight Boots Lipped, straight shrink boots provide mechanical and environmental protection from damage and debris. Standard boots are available in eight material options with five adhesive choices. Glenair straight boots are made in accordance with AS85045 and fit most standard boot adapters for circular connectors. All adhesive lined and unlined shrink books are RoHS compliant. Shrink boots are water-tight when equipped with factory installed or user-installed adhesive. Lipped boots lock into boot groove located on adapter and can be ordered with potting holes to fit your requirements. These lipped boots come standard with eylelet for attachment of protective covers. Choose boot size based on adapter diameter and cable diameter. 770 Product Series 770 = Series 77 shrink boot Basic Number 001 = lipped boot with eyelet Angular Function S = straight Material See material and adhesives table Boot Size 03, 04, 05, 06, 07, 08, 09; see dimensions table Adhesive Lined Omit for none; see material and adhesives table Potting Ports PP = potting port  Omit for none -001 S 1 03 W1 -PP Material and Adhesive Compatibility Material Code C How to Order Sample Part Number 1 2 3 5 6 7 8 9 Material Description (Compound No.) W1 High Temperature -55°C to 125°C Hot Melt Adhesives W2 W3 (TACOM approved) Standard Elastomeric -55°C to 70°C -55°C to 125°C High Performance Epoxy Adhesives R U Pre-Coat Two-Part -75°C to 150°C -75°C to 155°C High-Performance Semi-Rigid Elastomer (2025) Zero Halogen Semi-Rigid Polyolefin (2010) General Purpose Flexible Polyolefin (2040) Viton Fluoroelastomer Blend (2050) High Performance Elastomer Alloy (2051) Semi-Rigid Polyolefin (2071) Low Outgassing Fluoropolymer Alloy (2008) Material Type 8 not available with pre-coat adhesive. Use Type U two-part epoxy Low Temp Flexible Polyolefin (2013) Type U epoxy adhesive is compatible with all boot materials. Ordered separately, user-installed (779-001). Order boot with no adhesive lining. NOTES 1. See Modification Codes listed in Section A for material color options available for Type 1 (compound 2025) material. C-4 © 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 • Dimensions in Inches (millimeters) are subject to change without notice. SERIES 77 Lipped, Straight Shrink Boots 770-001S Straight Boot, with Eyelet Dimensions Lipped Straight Adapter Shrink Boots, Standard: Dimensions Ce Ae Straight Boots P0 Ø.079 (2.0) REF R0 Ar Cr Ct C0 at R0 POTTING PORT (IF REQ'D) C RECOVERED (-001) AS SUPPLIED Dimensions Table Glenair Boot US Part Size Marking 03 S03 04 S04 05 S05 06 S06 07 S07 08 S08 09 S09 Shell Size 8,10 11-16 16-17 17-21 21-23 25 Ae Dia Min Ce Dia Min Ar Dia Max at ±30% Cr Dia Max ct ±20% CO Ref PO ±10% RO Ref .945 (24.0) 1.181 (30.0) 1.260 (32.0) 1.417 (36.0) 1.693 (43.0) 2.362 (60.0) 2.599 (66.0) .945 (24.0) 1.181 (30.0) 1.260 (32.0) 1.417 (36.0) 1.693 (43.0) 2.362 (60.0) 2.599 (66.0) .413 (10.5) .551 (14.0) .709 (18.0) .866 (22.0) 1.102 (28.0) 1.378 (35.0) 1.752 (44.5) .063 (1.6) .071 (1.8) .071 (1.8) .079 (2.0) .087 (2.2) .130 (3.3) .150 (3.8) .197 (5.0) .236 (6.0) .276 (7.0) .335 (8.5) .394 (10.0) .591 (15.0) .661 (16.8) .035 (0.9) .039 (1.0) .047 (1.2) .047 (1.2) .051 (1.3) .063 (1.6) .079 (2.0) .394 (10.0) .630 (16.0) .748 (19.0) .787 (20.0) 1.142 (29.0) 1.575 (40.0) 2.283 (58.0) 1.496 (38.0) 2.165 (55.0) 2.638 (67.0) 3.150 (80.0) 3.898 (99.0) 5.118 (130.0) 6.693 (170.0) .748 (19.0) 1.181 (30.0) 1.299 (33.0) 1.575 (40.0) 2.165 (55.0) 1.969 (50.0) 3.543 (90.0) For materials Type 2, Type 3 and Type 9, dimension 'Ce' is nominal Lipped Straight Shrink Boots: Part Marking, Raised Lettering RECOVERED EXPANDED LETTER “C” INDICATES CABLE END LETTER “A” INDICATES ADAPTER (CONNECTOR) END BOOT SIZE CODE LETTER “S” INDICATES STRAIGHT BOOT © 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 • Dimensions in Inches (millimeters) are subject to change without notice. C-5