770-003A104

SERIES 77 Lipped, 90° Angle Shrink Boots 770-003A Angled Boot, No Eyelet How to Order 90° Boots Lipped, right angle heat shrink boots provide mechanical and environmental protection from damage and debris. These shrink boots fit most standard boot adapters for circular connectors. All adhesive lined and unlined shrink books are RoHS compliant. Shrink boots are water-tight when equipped with factory installed or user-installed adhesive. Lipped boots lock into boot groove located on adapter. Choose boot size based on adapter diameter and cable diameter. How to Order 770 Product Series 770 = Series 77 shrink boot Basic Number 003 = lipped boot Angular Function A = 90° Material See material and adhesives table Boot Size 02, 03, 04, 05, 06, 07, 08, 09; see dimensions table Adhesive Lined Omit for no adhesive; see material and adhesives table Potting Port or Drain Hole PP = potting port  DH = drain holes -003 A 1 03 W1 -DH Omit for none Material and Adhesive Compatibility Material Code C Sample Part Number 1 2 3 5 6 7 8 9 Material Description (Compound No.) W1 High Temperature -55°C to 125°C Hot Melt Adhesives W2 W3 (TACOM approved) Standard Elastomeric -55°C to 70°C -55°C to 125°C High-Performance Semi-Rigid Elastomer (2025) Zero Halogen Semi-Rigid Polyolefin (2010) General Purpose Flexible Polyolefin (2040) Viton Fluoroelastomer Blend (2050) High Performance Elastomer Alloy (2051) Semi-Rigid Polyolefin (2071) Low Outgassing Fluoropolymer Alloy (2008) Material Type 8 not available with pre-coat adhesive. Use Type U two-part epoxy Low Temp Flexible Polyolefin (2013) Type U epoxy adhesive is compatible with all boot materials. Ordered separately, user-installed (779-001). Order boot with no adhesive lining. AS85049/141 Cross Ref. NOTES 1. See Modification Codes listed in Section A for material color options available for Type 1 (compound 2025) material. C-26 High Performance Epoxy Adhesives R U Pre-Coat Two-Part -75°C to 150°C -75°C to 155°C Boot Size Glenair US Part Marking 02 03 04 05 06 07 08 09 A02 A03 A04 A05 A06 A07 A08 A09 AS85049/141 Ref 01 02 03 04 05 06 07 © 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 • Dimensions in Inches (millimeters) are subject to change without notice. SERIES 77 Lipped, 90° Angle Shrink Boots 770-003A Angled Boot, No Eyelet Dimensions Lipped Right Angle Adapter Shrink Boots: Dimensions C0 90° Boots P Potting Port (If Required) ct Cr Ce Ae R at As Supplied C Ar Size 02 to 09 Recovered Dimensions Boot Size 02 03 04 05 06 07 08 09 Shell Size Ae DIA MIN Ce DIA MIN Ar DIA MAX at ±30% Cr DIA MAX ct ±20% CO REF P±20% R Ref 7 9 11-15 13-17 17-21 21-23 23-25 25-33 .669 (17.0) .945 (24.0) 1.181 (30.0) 1.260 (32.0) 1.417 (36.0) 1.693 (43.0) 2.165 (55.0) 2.599 (66.0) .669 (17.0) .945 (24.0) 1.181 (30.0) 1.260 (32.0) 1.417 (36.0) 1.693 (43.0) 2.165 (55.0) 2.599 (66.0) .315 (8.0) .394 (10.0) .532 (13.5) .709 (18.0) .886 (22.5) 1.102 (28.0) 1.378 (35.0) 1.752 (44.5) .051 (1.3) .063 (1.6) .071 (1.8) .071 (1.8) .079 (2.0) .087 (2.2) .130 (3.3) .150 (3.8) .138 (3.5) .197 (5.0) .217 (5.5) .276 (7.0) .335 (8.5) .394 (10.0) .591 (15.0) .661 (16.8) .028 (0.7) .035 (0.9) .039 (1.0) .047 (1.2) .047 (1.2) .059 (1.5) .079 (2.0) .079 (2.0) .276 (7.0) .394 (10.0) .472 (12.0) .591 (15.0) .630 (16.0) .709 (18.0) 1.260 (32.0) 1.890 (48.0) .787 (20.0) .984 (25.0) 1.260 (32.0) 1.535 (39.0) 1.929 (49.0) 2.165 (55.0) 3.150 (80.0) 4.250 (108.0) .787 (20.0) .984 (25.0) 1.063 (27.0) 1.260 (32.0) 1.496 (38.0) 1.850 (47.0) 2.165 (55.0) 2.680 (68.0) For materials Type 2, Type 3 and Type 9, dimension 'Ce' is nominal Lipped Right Angle Shrink Boots: Part Marking, Raised Lettering EXPANDED RECOVERED A LETTER “C” INDICATES CABLE END C LETTER “A” INDICATES ADAPTER (CONNECTOR) END GLENAIR A03 BOOT SIZE CODE LETTER “A” INDICATES STRAIGHT BOOT © 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 • Dimensions in Inches (millimeters) are subject to change without notice. C-27